Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Front Brake Rotor Specifications:
      12.80" (325mm)
      Vented
      5 Lug
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Quantity:   Pair
  • Brake Rotor Coating:   Zinc Coated
  • Product Line:   Performance

Specifications:

  • Comes as a matched Pair
    • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • Vented
  • 12.80" (325mm) diameter
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel and Tire (0:56)
    • Loosen the lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
  2. step : Removing the Brake Caliper (1:25)
    • Remove the two 17mm bolts from the brake caliper
    • Pull off the brake caliper
    • Hang the caliper aside with a bungee cord
    • Remove the brake pads
  3. step : Removing the Brake Rotor (2:25)
    • Remove the two 21mm bolts from the caliper bracket
    • Pull off the caliper bracket
    • Pull off the brake rotor
  4. step : Preparing the Brakes (Preparing the Brakes)
    • Tap the brake pads out of the brake caliper
    • Pry the brake caliper clips off the caliper with a flat blade screwdriver
    • Clean the caliper and clips with a wire brush
    • Apply brake grease to the clips
    • Pull out each caliper slide
    • Clean each caliper slide
    • Apply brake grease to each caliper slide
    • Clean the wheel hub surface with a wire brush
    • Apply brake grease to the hub surface
    • Slide the new rotor onto the wheel studs backwards
    • Clean the rotor's contact surface with brake cleaner
  5. step : Installing the Brake Rotor (8:45)
    • Slide the rotor onto the wheel studs
    • Slide an axle nut, if one is available, onto one wheel stud
    • Thread a lug nut onto the wheel stud to hold the rotor in place
    • Put the caliper bracket into place
    • Insert the 21mm bolts into the caliper bracket
  6. step : Installing the Wheel and Tire (11:32)
    • Slide on the wheel
    • Start the lug nuts by hand
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds of torque

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 17mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Simple fix
Look great, performing well so far. OEM rotors warped so I took to parts house to have them turned and purchased ceramic pads. That worked fine, for a while. Within months, the OEMs were warped again. Definite upgrade compared to the original rotors. Cant beat the price. Would definitely recommend.
August 15, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2011-2012Ford Explorer Ford Explorer Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
2013-2014Ford Explorer Ford Explorer Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance without Heavy Duty Brakes Nakamoto
2015-2018Ford Explorer Ford Explorer Base Model Cross Drilled & Slotted Brake Rotor Pair Zinc Coated Performance Front Nakamoto
2009-2012Ford Flex Ford Flex Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
2013-2018Ford Flex Ford Flex Cross Drilled & Slotted Brake Rotor Pair Zinc Coated Performance Front without Heavy Duty Brakes Nakamoto
2010-2012Ford Taurus Ford Taurus Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
2013-2018Ford Taurus Ford Taurus Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair (excluding SHO Models) Performance Nakamoto
2009-2012Lincoln MKS Lincoln MKS Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
2010-2012Lincoln MKT Lincoln MKT Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
2013-2018Lincoln MKT Lincoln MKT with Standard Brakes Cross Drilled & Slotted Brake Rotor Pair Zinc Coated Performance Front Nakamoto
Part #: 1APBR00167


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 54166-DSZ

How-to Video:

(12:27 min)