Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Rotor Type:   Cross Drilled & Slotted
  • Quantity:   Pair
  • Brake Rotor Coating:   Zinc Coated
  • Product Line:   Performance

Specifications:

  • Comes as a matched Pair
  • Includes both LH (Driver) & RH (Passenger) Side Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:06)
    • Loosen the lug nuts with your lug wrench or 13/16 inch socket and ratchet
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel
  2. step : Remove the brakes (2:00)
    • Unbolt the two 10 mm caliper bolts
    • Use a flat blade screwdriver to compress the caliper pistons to get the caliper off the rotor
    • Pry out the brake pads with your flat blade screwdriver.
    • Remove the rubber plug behind the hub to loosen the emergency break with a screwdriver.
    • There is a star shaped gear that you turn with the flat blade screwdriver to loosen it.
    • Use a pry bar to apply outward pressure to the rotor and a hammer to break the rotor loose.
    • Clean up the emergency break adjustor with a bit of penetrating oil.
  3. step : Install the new brakes (6:50)
    • Put the rotor back on, cleaning the rotor with brake cleaner before hand.
    • Tighten the emergency break with a flat blade screwdriver
    • Install new brake pads into the brake caliper.
    • Apply a small about of anti-seize grease to the edges of the pads to get them into the caliper
    • Work the caliper back onto the rotor.
    • Bolt the two 10 mm bolts on the caliper and torque to 20 ft lbs.
  4. step : Put the wheel back on (10:12)
    • Put the wheel on and hand tighten the lug nuts
    • Lower the car and torque the lug nuts to 100 ft lbs
    • Pump the brakes a few times to recompress the caliper pistons.
    • Do a couple 5 to 10 mile an hour stops in the drive way to make sure your brakes are working properly before you road test it.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2011Ford Crown Victoria Ford Crown Victoria Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
2003-2011Mercury Grand Marquis Mercury Grand Marquis Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
2003-2004Mercury Marauder Mercury Marauder Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
Part #: 1APBR00220


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 54105-DSZ

How-to Video:

(11:10 min)