Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Front Brake Rotor Specifications:
      Vented
      12.13" (308mm)
      5 Lug
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Quantity:   Pair
  • Brake Rotor Coating:   Zinc Coated
  • Product Line:   Performance

Specifications:

  • Comes as a matched Pair
    • Includes LH (Driver Side) & RH (Passenger Side) Front
  • Cross drilled, Slotted, And Zinc Coated
  • Direct replacement
  • Fit 5 Lug Wheels
  • 14mm Studs
  • 12.13" (308mm) diameter

Note:
The rotors do not include wheel bearings or seals. You will need to reuse your originals.

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:30)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (1:00)
    • Remove 13mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  3. step : Preparing the New Brake Pads and Caliper (3:05)
    • Remove the brake pad brackets
    • Remove the caliper boot slides
    • Clean the brake pad brackets with a wire brush
    • Clean the caliper bracket with a wire brush
    • Clean off the caliper boot sliders and inspect the boots
    • Apply grease to the caliper slides
    • Insert the slides into the caliper
    • Press on the brake pad brackets
    • Apply grease to the brake pad slides
  4. step : Installing the New Brake Rotor (9:20)
    • Slide the rotor on backwards
    • Clean the rotor with brake parts cleaner
    • Turn the rotor around
    • Clean the rotor with brake parts cleaner
    • Put the caliper bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 136 foot-pounds of torque
  5. step : Installing the New Brake Pads (11:12)
    • Apply grease to the brake pad tabs
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 21-26 foot-pounds
    • Clean the rotor with brake parts cleaner or mineral spirits
  6. step : Reattaching the Wheel (14:02)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 83-112 foot-pounds in a crossing or star pattern
  7. step : Testing the Brakes (14:45)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill Bit Set

  • General Tools

  • Large C-Clamp
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Brake Parts Cleaner
  • Safety Glasses
  • Paper Towels
  • Bungee Cord
  • Anti-Seize Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000Ford Expedition Ford Expedition (Built After 11/99 Production Date) Pair 14mm Wheel Stud Size with Brake Rotor Front Rear Wheel Drive Cross Drilled & Slotted Zinc Coated Performance Nakamoto
2001-2002Ford Expedition Ford Expedition Pair Brake Rotor Front Rear Wheel Drive Cross Drilled & Slotted Zinc Coated Performance Nakamoto
2000-2003Ford F150 Truck Ford F150 Truck Lightning Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
2000Lincoln Navigator Lincoln Navigator (Built After 11/99 Production Date) Pair 14mm Wheel Stud Size with Brake Rotor Front Rear Wheel Drive Cross Drilled & Slotted Zinc Coated Performance Nakamoto
2001-2002Lincoln Navigator Lincoln Navigator Pair Brake Rotor Front Rear Wheel Drive Cross Drilled & Slotted Zinc Coated Performance Nakamoto
Part #: 1APBR00342


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 54091-DSZ

How-to Video:

(14:56 min)