Specifications:

  • Comes as a matched Pair
  • Includes LH (Driver Side) & RH (Passenger Side) Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • 280mm x 28mm. (11 x 1.1") diameter
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Quantity: Pair
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:30)
    • Loosen the lug nuts
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside
  2. step : Remove the calipers and rotor (2:10)
    • Unbolt the 12 mm bolts to remove the calipers.
    • Remove the brake pads.
    • Use a breaker bar to unbolt the 18 mm caliper bracket bolts.
    • Remove the rotor.
    • A few smacks with a hammer may be needed to get the rotor off.
  3. step : Install the calipers and new rotors. (4:30)
    • Clean the hub with a wire brush and apply anti seize grease.
    • Install a new rotor after cleaning it with brake parts cleaner.
    • Clean the caliper bracket with a wire brush.
    • Check the caliper bracket pistons and put new brake pads into the brackets.
    • Put the caliper on and torque the bolts to 20 foot pounds
    • Torque the caliper bolts to 85 ft lbs.

Tools needed for replacement:

    General Tools

  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 12mm Wrench
  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2003-2009 Chrysler PT Cruiser Front Brake Rotor for Turbo with Sport Suspension Pair Cross Drilled & Slotted Zinc Coated Performance Nakamoto
  • 2003-2005 Dodge Neon RT & SRT-4 Front Brake Rotor for Models with Sport Suspension Pair Cross Drilled & Slotted Zinc Coated Performance Nakamoto

This part replaces:

  • Nakamoto 5273141AB-DSZ
Part #: 1APBR00300

Nakamoto
Brand #: 5273141AB-DSZ

How-to Video:

(10:25 min)