Specifications:

  • Comes as a matched Pair
  • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 lug wheels
  • Vented
  • 12.59" (320mm) diameter

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:31)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:18)
    • Remove 14mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Secure the caliper with a bungee cord
    • Remove the clips from the brake pads
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Removing the Brake Rotor (3:25)
    • Remove 19mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the Phillips screw from the rotor
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Preparing the New Brake Pads and Rotors (7:01)
    • Clean off the hub rust with an abrasive pad
    • Spray brake cleaner on the hub
    • Apply brake grease to the hub
    • Slide the rotor on
    • Clean the rotor with brake parts cleaner
    • Tighten the Phillips screw to the rotor
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Clean the caliper with a wire brush
    • Apply grease to the brake pad tabs
  5. step : Installing the New Brake Pads (9:57)
    • Put the bracket back into place
    • Start the 19mm bolts by hand
    • Press the old metal plate protector to the new pads
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the clips in and hold the brake pads
    • Put the caliper on
  6. step : Reattaching the Wheel (13:39)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 94 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bungee Cord
  • Anti-Seize Grease
  • M8 Bolt
  • Cloth Rags

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 19mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(14:46 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bungee Cord
  • Anti-Seize Grease
  • M8 Bolt
  • Cloth Rags

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 19mm Wrench



This part replaces:

  • Nakamoto 31508-DSZ

Vehicle Fit

  • 2009-2014 Acura TL Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2011-2014 Honda Odyssey Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2006-2014 Honda Ridgeline Cross Drilled & Slotted Brake Rotor Zinc Coated Pair Performance Front Nakamoto
Part #: 1APBR00236

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: 31508-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More