These front brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 26300AG01A, 26300 AG01A, 26300SA000, 26300 SA000, 26300SA001, 26300 SA001
  • Fits 5 Lug Wheels
  • Vented
  • 11.54" (292 mm) Diameter

These front brake rotors make great replacements and have excellent value over the price of dealer brake rotors.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Quantity: Pair
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 11.50" (292mm)
  • Front Brake Rotor Specifications: 5 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Jacking up the Car (0:23)
    • Park on level ground
    • Set the parking brake firmly
    • Use a 19mm socket and a breaker bar to break the lug nuts loose
    • Jack up the car and place jack stands under the car
    • Remove the lug nuts the rest of the way
    • Remove the wheel
  2. step : Removing Caliper and Pads, Rotors (3:12)
    • Turn the wheel to make more room
    • Try to compress the piston as much as possible
    • Use 14mm wrench to loosen upper and lower caliper bolts
    • Remove the bolts
    • Slide the caliper off the bracket
    • Tie the caliper with a bungee cord so it doesn't hang
    • Remove the brake pads
  3. step : Removing the Rotor and Caliper Bracket (5:17)
    • Use 17 mm socket and a breaker bar to brake the caliper bracket bolts loose
    • Use a ratchet to remove them the rest of the way
    • Take the bracket off
    • Remove the rotor (use hammer if necessary)
  4. step : Cleaning Brake Hardware (7:22)
    • Use brake parts cleaner and a wire brush to scrub the hardware and the bracket
    • Check the slide pins and lubricate them if necessary
    • Use caliper grease or silicone paste to lubricate the slide pins
  5. step : Reinstalling the Rotor and Caliper Bracket (12:02)
    • Install the rotor backwards and clean it with brake parts cleaner
    • Flip it the correct way and clean the other side
    • Thread on a lug nut to help hold the rotor
    • Install the caliper bracket
    • Install the two 17mm bolts by hand
    • Torque them down to 89 ft-lbs
  6. step : Installing the Pads and Caliper (13:54)
    • Grease up the ears of the pads as well as the backing plate
    • Install the pad with the wear indicator on the inside
    • Install the outer pad
    • Use an old brake pad and a large C clamp to compress the caliper pistons
    • Install the caliper
    • Tighten the 14mm bolts by had
    • Torque them down to 20 ft-lbs
    • Step on the brake pedal a few times until pedal is stiff
  7. step : Reinstalling the Wheel and Lowering the Vehicle (17:37)
    • Remove the lug nut
    • Install the wheel
    • Start the lug nuts by hand
    • Tighten them down as much as possible with the socket
    • Jack up the car
    • Remove jack stands
    • Carefully lower the car to the ground
    • Torque the wheels to 89 ft-lbs in a cross pattern

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Bungee Cord

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2013-2016Scion FR-S Scion FR-S Front Brake Rotor Pair for Models with 11.5" (292mm) Diameter Rotors Nakamoto
2013-2016Subaru BRZ Subaru BRZ Front Brake Rotor Pair for Models with Rear Vented Rotors Nakamoto
2004-2006Subaru Baja Subaru Baja Front Brake Rotor Pair H4 2.5L Turbo Nakamoto
2009-2017Subaru Forester Subaru Forester Front Brake Rotor Pair Nakamoto
2009-2014Subaru Impreza Subaru Impreza GT Front Brake Rotor Pair H4 2.5L Turbo Nakamoto
2008-2014Subaru Impreza WRX Subaru Impreza WRX Front Brake Rotor Pair Nakamoto
2006-2014Subaru Legacy Subaru Legacy Front Brake Rotor Pair H4 2.5L (excluding Turbo Models) Nakamoto
2005Subaru Outback Subaru Outback Front Brake Rotor Pair H4 2.5L Turbo Nakamoto
2006-2009Subaru Outback Subaru Outback Front Brake Rotor Pair Nakamoto
2010-2014Subaru Outback Subaru Outback Front Brake Rotor Pair H4 2.5L Nakamoto
2013-2015Subaru XV Crosstrek Subaru XV Crosstrek Front Brake Rotor Pair Nakamoto

This part replaces:

  • Nakamoto 31407
Part #: 1ABFS00514


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 31407

How-to Video:

(19:54 min)