Specifications:

  • Comes as a matched Pair
  • Includes both LH (Driver) & RH (Passenger) Side Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Lug Wheels
  • Vented
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Quantity: Pair
  • Rear Brake Rotor Specifications: 12.13" (308mm)
  • Rear Brake Rotor Specifications: Vented
  • Rear Brake Rotor Specifications: 5 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (0:52)
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Inspect and remove the brakes (1:07)
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 14 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and remove the caliper.
    • Unbolt the 19 mm caliper bracket bolts.
    • Remove the rotor and pop the plug out of the rotor.
  3. step : Install the new disc brakes (2:07)
    • Hit the emergency brake with brake cleaner.
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle and replace the little access plug.
    • Mount the caliper bracket and torque the 19 mm bolts to 85-90 ft lbs
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 14 mm socket.
    • Torque the 14 mm bolt to 25 ft lbs.
  4. step : Mount the wheel (4:39)
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 19mm Socket
  • 21mm Socket
  • 8mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Size fitment
For all you Infiniti M37x owners they will tell you that these won't fit the X that they will only fit the M37 but they will as long as you don't have the sport model I bought these for my 2013 M37x and love them hope this review is helpful
October 18, 2016
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2003-2012 Infiniti FX35 Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2013 Infiniti FX37 Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2003-2008 Infiniti FX45 Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2013 Infiniti JX35 Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2012-2013 Infiniti M35h Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2011-2013 Infiniti M37 Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2011-2013 Infiniti M56 Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair without Sport Package Performance Nakamoto
  • 2014-2017 Infiniti Q50 Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2014-2017 Infiniti Q70 Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2014-2017 Infiniti QX60 Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2014-2017 Infiniti QX70 Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2003-2007 Nissan Murano Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2009-2017 Nissan Murano Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2013-2017 Nissan Pathfinder Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2004-2009 Nissan Quest Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2011-2017 Nissan Quest Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto

This part replaces:

  • Nakamoto 31348-DSZ
Only 3 left in stock
Part #: 1APBR00233


Order must be placed by 4pm ET
Nakamoto
Brand #: 31348-DSZ

How-to Video:

(05:32 min)