Specifications:

  • Fits 5 Lug Wheels
  • 12.6" (320 mm) Diameter Vented Rotors

 

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Quantity: Pair
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 5 Lug
  • Front Brake Rotor Specifications: 12.60" (320mm)
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (0:52)
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Inspect and remove the brakes (1:07)
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 14 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and remove the caliper.
    • Unbolt the 19 mm caliper bracket bolts.
    • Remove the rotor and pop the plug out of the rotor.
  3. step : Install the new disc brakes (2:07)
    • Hit the emergency brake with brake cleaner.
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle and replace the little access plug.
    • Mount the caliper bracket and torque the 19 mm bolts to 85-90 ft lbs
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 14 mm socket.
    • Torque the 14 mm bolt to 25 ft lbs.
  4. step : Mount the wheel (4:39)
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 19mm Socket
  • 21mm Socket
  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2008-2012 Infiniti EX35 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2013 Infiniti EX37 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2003-2005 Infiniti FX35 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2003-2005 Infiniti FX45 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2011-2012 Infiniti G25 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005-2008 Infiniti G35 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair without Sport Package Rear Wheel Drive Performance Nakamoto
  • 2009-2013 Infiniti G37 Sedan Front Cross Drilled & Slotted Zinc Coated without Sport Package Brake Rotor Pair Performance Nakamoto
  • 2006-2010 Infiniti M35 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2012-2013 Infiniti M35h Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2011-2013 Infiniti M37 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair without Sport Package Performance Nakamoto
  • 2006-2010 Infiniti M45 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2011-2013 Infiniti M56 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2014-2015 Infiniti QX50 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2015-2017 Infiniti QX70 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2006-2009 Nissan 350Z Base Model Touring Package Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2006-2009 Nissan 350Z Enthusiast Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with Automatic Transmission Performance Nakamoto
  • 2009-2013 Nissan 370Z Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair without Sport Package Performance Nakamoto
  • 2005-2006 Nissan Altima SE-R Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2004-2017 Nissan Maxima Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005-2007 Nissan Murano Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2009-2014 Nissan Murano Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto

This part replaces:

  • Nakamoto 31341-DSZ
Part #: 1APBR00021

Nakamoto
Brand #: 31341-DSZ

How-to Video:

(05:32 min)