These brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Come as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 32 011 186, 32011186, 26300AE071, 26310AA091, 26310AA092, 26310AA120, 26300AE050, 26300AE070, 26300 AE071, 26310 AA091, 26310 AA092, 26310 AA120, 26300 AE050, 26300 AE070
  • Fits 5 Stud Wheels
  • Outside Diameter: 10.87 Inches

These brake rotors make great replacements and have excellent value over the dealer brake rotors.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Quantity: Pair
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 10.87" (276mm)
  • Front Brake Rotor Specifications: 5 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:23)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull of the wheel
  2. step : Inspecting the Brakes (1:37)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gauges on both sides of the rotor
    • Check the thickness of the brake pads
  3. step : Removing the Brakes (2:56)
    • Remove the 14mm bolts from the caliper
    • Slide the boots in
    • Pull off the caliper
    • Slide out the brake pads
    • Check the caliper slides for smooth movement
    • If necessary clean the slides with a wire brush and grease them
    • Pull the brake pad retainers off the caliper bracket
    • If reusing the retainers, clean them with a wire brush
    • Apply penetrating oil to the 17mm bolts and to the rotor around the lugs
    • Remove the 17mm bolts from the caliper bracket using a breaker bar or pipe for leverage
    • Remove the caliper bracket
    • Pull the rotor off
  4. step : Installing the New Brakes (6:42)
    • Insert the caliper bracket between the rotor and the steering knuckle
    • Start the bolts by hand and tighten them with the ratchet
    • Tighten the bracket bolts to 85 foot-pounds with the torque wrench
    • Push the caliper pistons in using a large C-clamp and the old brake pad
    • Reattach the brake pad retainers
    • Insert the inner brake pad with the wear tab at the bottom
    • Insert the outer pad
    • Put the caliper in place
    • Start the caliper bolts by hand
    • Tighten the caliper bolts to 20 foot-pounds
  5. step : Reattaching the Wheel (10:45)
    • Straighten out the steering knuckle
    • Slide the Wheel into place
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot pounds in a crossing or star pattern
  6. step : Testing the Brakes (11:16)
    • Pump your brakes repeatedly
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Wire Brush
  • Large C-Clamp
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 17mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005-2006Saab 9-2X Saab 9-2X Front Brake Rotor for Models with 10.9" (277mm) Diameter Rotors Pair Nakamoto
2013-2015Scion FR-S Scion FR-S Front Brake Rotor for Models with Solid Rear Rotors Pair Nakamoto
2013-2016Subaru BRZ Subaru BRZ Front Brake Rotor for Models with Solid Rear Rotors Pair Nakamoto
1998-2002Subaru Forester Subaru Forester Front Brake Rotor Pair Nakamoto
1998-2001Subaru Impreza Subaru Impreza RS Front Brake Rotor H4 2.5L Pair Nakamoto
2002-2014Subaru Impreza Subaru Impreza Front Brake Rotor Pair Nakamoto
1997-2001Subaru Impreza Outback Subaru Impreza Outback Front Brake Rotor for Models with 10.9" (277mm) Diameter Rotors Pair Nakamoto
2002-2011Subaru Impreza Outback Subaru Impreza Outback Front Brake Rotor Pair Nakamoto
1997-1998Subaru Legacy Subaru Legacy Front Brake Rotor H4 2.5L Pair Nakamoto
1999-2004Subaru Legacy Subaru Legacy Front Brake Rotor for Models with 10.9" (277mm) Diameter Rotors Pair Nakamoto
2005Subaru Legacy Subaru Legacy Front Brake Rotor Pair (excluding Turbo Models) Nakamoto
1996-1999Subaru Legacy Outback Subaru Legacy Outback Front Brake Rotor Pair Nakamoto
2000Subaru Outback Subaru Outback Front Brake Rotor for Models with Rear Disc Brakes Pair Nakamoto

This part replaces:

  • Nakamoto 31247
Part #: 1ABFS00185


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 31247

How-to Video:

(11:47 min)