These rear brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 43206-2Y503, 43206-31U12, 43206-4U001, 43206-4V001, 43206-WA201, 432062Y503, 4320631U12, 432064U001, 432064V001, 43206WA201
  • Fit 5 Stud Wheels
  • 10.94" (278mm) Diameter Solid (not Vented) Rotors

These brake rotors make great replacements and have excellent value over the price of dealer brake rotors.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Quantity: Pair
  • Rear Brake Rotor Specifications: Solid
  • Rear Brake Rotor Specifications: 10.94" (278mm)
  • Rear Brake Rotor Specifications: 5 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:04)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:19)
    • Remove 14mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off
    • Reset the caliper using a caliper reset tool
  3. step : Removing the Brake Rotor (3:20)
    • Remove the two 17mm bolts from the caliper bracket
    • Remove bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  4. step : Installing the New Brake Rotor (3:51)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the 17mm bolts by hand
    • Tighten the bolts to between 65 and 70 foot-pounds of torque
  5. step : Preparing the Caliper Slides (4:24)
    • Remove the caliper slide
    • Clean the caliper slide
    • Apply grease to the caliper slides
    • Replace the caliper slide
  6. step : Installing the New Brake Pads (4:40)
    • Reinstall the brake pad springs
    • Apply grease to the brake pads
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread 14mm bolts by hand
    • Tighten bolts to 23 to 25 foot-pounds
  7. step : Reattaching the Wheel (6:12)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (6:36)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • White Grease

  • Ratchets & Related

  • 3/8 Inch Breaker Bar
  • 3/8 Inch Drive Ratchet
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

  • Specialty Tools

  • Brake Caliper Tool

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-2001 Infiniti I30 Rear Brake Rotor Pair Nakamoto
  • 2002-2004 Infiniti I35 Rear Brake Rotor Pair Nakamoto
  • 1994 Nissan Maxima Rear Brake Rotor Pair (Built After 1/94 Production Date) Nakamoto
  • 1995-2003 Nissan Maxima Rear Brake Rotor Pair Nakamoto

This part replaces:

  • Nakamoto 31134
Part #: 1ABFS00759

Nakamoto
Brand #: 31134

How-to Video:

(07:04 min)