Replaces

Brake Rotor Nakamoto 55097-DSZ, 55133-DSZ - 1APBS00387

Specifications:

  • Comes as a Set of 4
    • Includes both LH (Driver) & RH (Passenger) Side Front & Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 6 Stud Wheels
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Quantity: 4 Piece Set
  • Front Brake Rotor Specifications: Vented
  • Rear Brake Rotor Specifications: 13.58" (345mm)
  • Rear Brake Rotor Specifications: 6 Lug
  • Front Brake Rotor Specifications: 12.99" (330mm)
  • Rear Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 6 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:07)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:25)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:47)
    • Remove the two 19mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • If only changing the pads, continue to Step 6 and install the new pads
  4. step : Removing the Brake Rotor (2:44)
    • Remove bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, douse the back side with penetrating oil and use two M10 bolts to press the rotor off
  5. step : Installing the New Brake Rotor (4:08)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Clean the caliper bracket with a wire brush
    • Remove the brake pad slides
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
    • Put the bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
  6. step : Installing the New Brake Pads (5:32)
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Grease the brake pads
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 50 foot-pounds of torque
  7. step : Reattaching the Wheel (7:29)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (7:53)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Floor Jack
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Fluid
  • Mineral Spirits
  • Brake Parts Cleaner
  • Rust Penetrant
  • White Grease
  • M10 x 7cm bolts

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)

  • Sockets - Metric

  • 22mm Socket
  • 19mm Socket
  • 18mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
replacement brake rotors
not sure why I only received only the front rotors until i emailed you? I did receive the rear ones a few days later...

Thanks
December 11, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Will this set fit a 2014 GMC soerra sle z 71?
Jeff P on Jul 15, 2018
BEST ANSWER: No these brakes will not work for your application and unfortunately we do not carry any that will!

Vehicle Fit

Year Make Model Description
2007-2017Cadillac Escalade Cadillac Escalade Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear 4 Piece Set Performance Nakamoto
2007-2017Cadillac Escalade ESV Cadillac Escalade ESV Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear 4 Piece Set Performance Nakamoto
2007-2013Cadillac Escalade EXT Cadillac Escalade EXT Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear 4 Piece Set Performance Nakamoto
2007-2013Chevy Avalanche 1500 Chevy Avalanche 1500 Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear 4 Piece Set Performance Nakamoto
2007Chevy Silverado 1500 Chevy Silverado 1500 New Body Style Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear 4 Piece Set Performance Nakamoto
2008-2017Chevy Silverado 1500 Chevy Silverado 1500 Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear 4 Piece Set Performance Nakamoto
2007-2014Chevy Suburban 1500 Chevy Suburban 1500 Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear 4 Piece Set Performance Nakamoto
2007-2017Chevy Tahoe Chevy Tahoe Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear 4 Piece Set Performance Nakamoto
2007GMC Sierra 1500 GMC Sierra 1500 New Body Style Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear 4 Piece Set Performance Nakamoto
2008-2017GMC Sierra 1500 GMC Sierra 1500 Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear 4 Piece Set Performance Nakamoto
2007-2017GMC Yukon GMC Yukon Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear 4 Piece Set Performance Nakamoto
2007-2013GMC Yukon XL 1500 GMC Yukon XL 1500 Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear 4 Piece Set Performance Nakamoto

This part replaces:

  • Nakamoto 55097-DSZ, 55133-DSZ
Part #: 1APBS00387

Out of Stock

Nakamoto
Brand #: 55097-DSZ, 55133-DSZ

How-to Video:

(08:17 min)