Replaces

Brake Rotor Nakamoto 55085-DSZ, 55087-DSZ - 1APBS01060

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Front Brake Rotor Specifications:
      Vented
      11.69" (297mm)
      5 Lug
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Zinc Coated
  • Rear Brake Rotor Specifications:
      Solid
      10.63" (270mm)
      5 Lug
  • Product Line:   Performance

Specifications:

  • 5 Lug
  • 10.63" (270mm) Solid rear rotor
  • 11.69" (297mm) Vented front rotor
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel and tire (1:30)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (2:00)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 15mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
  3. step : Remove brake disk (2:44)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (2:56)
    • Remove the 3 bolts securing the hub using your 13mm socket and 3/8 extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a rubber mallet to break it free, and work around the flange with the hammer to pull it off.
    • Leave the top 13mm loosely still in to prevent the hub from flying out if you hit it too hard.
    • Remove the hub, using driving tools to help work it out of the steering knuckle.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (8:30)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Watch part 2 to install your new 1A Auto hub!

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2007Buick Allure Buick Allure Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear Performance Nakamoto
2008-2009Buick Allure Buick Allure CXS Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Performance Nakamoto
2008-2009Buick Allure Buick Allure CXL Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Performance Nakamoto
2008-2009Buick Allure Buick Allure CX Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Performance Nakamoto
2005-2007Buick LaCrosse Buick LaCrosse Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear Performance Nakamoto
2008-2009Buick LaCrosse Buick LaCrosse CXS Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Performance Nakamoto
2008-2009Buick LaCrosse Buick LaCrosse CXL Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Performance Nakamoto
2008-2009Buick LaCrosse Buick LaCrosse CX Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Performance Nakamoto
2004Pontiac Grand Prix Pontiac Grand Prix Cross Drilled & Slotted Zinc Coated Brake Rotor Front & Rear Performance Nakamoto
2005-2008Pontiac Grand Prix Pontiac Grand Prix GTP Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Performance Nakamoto
2005-2008Pontiac Grand Prix Pontiac Grand Prix GT Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Performance Nakamoto
2005-2008Pontiac Grand Prix Pontiac Grand Prix Base Model Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Performance Nakamoto
Part #: 1APBS01060


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 55085-DSZ, 55087-DSZ

How-to Video:

(09:37 min)