Replaces

Brake Rotor Nakamoto 55054-DSZ, 55067-DSZ - 1APBS00424

Specifications:

  • Comes as a matched Set of 4
    • Includes LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Direct replacement
  • 6 wheel stud holes
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Quantity: 4 Piece Set
  • Front Brake Rotor Specifications: 12.01" (305mm)
  • Front Brake Rotor Specifications: Vented
  • Rear Brake Rotor Specifications: 12.99" (330mm)
  • Rear Brake Rotor Specifications: 6 Lug
  • Rear Brake Rotor Specifications: Solid
  • Front Brake Rotor Specifications: 6 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:37)
    • Loosen the 22mm caps on the hubcap with the vehicle on the ground
    • Pull the hubcap free
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:03)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:13)
    • Remove T55 Torx bolts from the brake caliper with a T55 Torx bit and ratchet
    • Use either a C-clamp to squeeze the rotor or a screwdriver to pry the brake caliper off
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Preparing the Brake Caliper (2:23)
    • Apply brake grease to either side of your brake pads
    • Push the brake pads into place, using a hammer if necessary
    • Using an old brake pad put it on to the caliper pistons and tighten it in with the C-Clamp
    • Grease up the caliper bolts
  5. step : Replacing the Brake Caliper (3:10)
    • Put the caliper back into place
    • Slide the slide bolts back in
    • Tighten the slide bolts to 30 ft/lbs
  6. step : Reattaching the Wheel (3:43)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Reattach the hubcap and tighten the caps
  7. step : Testing the Brakes (4:15)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Fluid

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 22mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 6 answers
Are these for a 2wd only or will they work on a Z71?
Hardy C on Aug 28, 2016
BEST ANSWER: Mine went on a 01 1500 suburban 4 wheel drive.
what brand are these rotors?
robert r on Feb 22, 2016
BEST ANSWER: Most likely made in China. Still good rotors. Anything else i looked at was twice the price for the same thing. Not to many choices when it comes to this type of vehicle. Chinese from parts store or chinese from 1a auto, or you can spend $3000 on a brembo big brake kit and buy bigger wheels and tires. The choice is yours.

Vehicle Fit

Year Make Model Description
2002Cadillac Escalade Cadillac Escalade Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set for Models with 13" (330mm) Diameter Rear Rotors Performance Nakamoto
2003-2006Cadillac Escalade Cadillac Escalade Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2003-2006Cadillac Escalade ESV Cadillac Escalade ESV Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2002-2006Cadillac Escalade EXT Cadillac Escalade EXT Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2002-2006Chevy Avalanche 1500 Chevy Avalanche 1500 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2003-2008Chevy Express 1500 Van Chevy Express 1500 Van Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2002-2005Chevy Silverado 1500 Chevy Silverado 1500 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set for Models with 13" (330mm) Diameter Rear Rotors Performance Nakamoto
2006Chevy Silverado 1500 Chevy Silverado 1500 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2007Chevy Silverado 1500 Classic Chevy Silverado 1500 Classic Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2000-2006Chevy Suburban 1500 Chevy Suburban 1500 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2000-2002Chevy Tahoe Chevy Tahoe Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set for Models with 13" (330mm) Diameter Rear Rotors Performance Nakamoto
2003-2006Chevy Tahoe Chevy Tahoe Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2003-2008GMC Savana 1500 Van GMC Savana 1500 Van Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2002-2005GMC Sierra 1500 GMC Sierra 1500 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set for Models with 13" (330mm) Diameter Rear Rotors Performance Nakamoto
2006GMC Sierra 1500 GMC Sierra 1500 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2007GMC Sierra 1500 Classic GMC Sierra 1500 Classic Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2000-2002GMC Yukon GMC Yukon Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set for Models with 13" (330mm) Diameter Rear Rotors Performance Nakamoto
2003-2006GMC Yukon GMC Yukon Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2000-2002GMC Yukon XL 1500 GMC Yukon XL 1500 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set for Models with 13" (330mm) Diameter Rear Rotors Performance Nakamoto
2003-2006GMC Yukon XL 1500 GMC Yukon XL 1500 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto

This part replaces:

  • Nakamoto 55054-DSZ, 55067-DSZ
Part #: 1APBS00424

Out of Stock

Nakamoto
Brand #: 55054-DSZ, 55067-DSZ

How-to Video:

(04:46 min)