These brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Fit 6 Lug Wheels
  • Direct replacements

NOTE: For 2007 Classic Style models: This vehicle has a crease in center of door skin. Unlike the New Body Style that has a smooth door skin. These parts are for the Classic Style truck.

These brake rotors make great replacements and have excellent value over the price of dealer brake rotors.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:41)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:11)
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Rotor and Brake Pads (1:23)
    • Remove T55 Torx bolts from the brake caliper with a T55 Torx bit and ratchet
    • Use either a C-clamp to squeeze the rotor or a screwdriver to pry the brake caliper off
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the two 18mm bolts from the caliper bracket
    • Slide the rotor off
  4. step : Preparing the Rotor and Brake Caliper (3:09)
    • Apply brake cleaner to either side of the rotor
    • Apply brake grease to either end of your brake pads
    • Use a wire brush to clean up the brake slides on the caliper bracket
  5. step : Replacing the Brake Caliper (3:46)
    • Push the rotor back into place
    • Twist on a lug nut
    • Put the caliper back into place and tighten the two 18mm bolts
    • Torque the 18mm bolts to 75 ft/lbs
    • Push the brake pads into place, using a hammer if necessary
    • Using an old brake pad, put it on to the caliper pistons and tighten it in with the C-Clamp
    • Grease up the caliper bolts
    • Put the caliper back into place
    • Slide the slide bolts back in
    • Torque the bolts to 30 ft/lbs
  6. step : Reattaching the Wheel (5:45)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Reattach the hubcap and tighten the caps
  7. step : Testing the Brakes (6:20)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Brake Fluid
  • Brake Parts Cleaner

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Fast shipping, part exactly as described.
Part came just a couple days after ordering. Was exactly as described and fit perfectly. Even had a video to help. Thanks
June 29, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002 Cadillac Escalade Front & Rear Brake Rotor 4 Piece Set for Models with Limited Slip Rear Axle & 13" (330mm) Diameter Rotors Nakamoto
  • 2003-2006 Cadillac Escalade Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2003-2006 Cadillac Escalade ESV Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2002 Cadillac Escalade EXT Front & Rear Brake Rotor 4 Piece Set for Models with Limited Slip Rear Axle & 13" (330mm) Diameter Rotors Nakamoto
  • 2003-2006 Cadillac Escalade EXT Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2002 Chevy Avalanche 1500 Front & Rear Brake Rotor 4 Piece Set for Models with Limited Slip Rear Axle & 13" (330mm) Diameter Rotors Nakamoto
  • 2003-2006 Chevy Avalanche 1500 Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2003-2008 Chevy Express 1500 Van Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2002 Chevy Silverado 1500 Front & Rear Brake Rotor 4 Piece Set for Models with Quadrasteer & 13" (330mm) Diameter Rotors Nakamoto
  • 2003-2004 Chevy Silverado 1500 Front & Rear Brake Rotor 4 Piece Set for Models with 6 Lug Wheels with Dual Piston Rear Calipers Nakamoto
  • 2005-2006 Chevy Silverado 1500 Front & Rear Brake Rotor 4 Piece Set for Models with 6 Lug Wheels with Dual Piston Rear Calipers & 4 Wheel Disc Brakes Nakamoto
  • 2007 Chevy Silverado 1500 Classic Front & Rear Brake Rotor 4 Piece Set for Models with 6 Lug Wheels with Dual Piston Rear Calipers & 4 Wheel Disc Brakes Nakamoto
  • 2000-2006 Chevy Suburban 1500 Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2000 Chevy Tahoe Front & Rear Brake Rotor 4 Piece Set for Models with Limited Slip Rear Axle & 13" (330mm) Diameter Rotors (excluding Z71 Models) Nakamoto
  • 2001-2002 Chevy Tahoe Front & Rear Brake Rotor 4 Piece Set for Models with Limited Slip Rear Axle & 13" (330mm) Diameter Rotors Nakamoto
  • 2003-2006 Chevy Tahoe Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2003-2008 GMC Savana 1500 Van Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2002 GMC Sierra 1500 Front & Rear Brake Rotor 4 Piece Set for Models with Quadrasteer & 13" (330mm) Diameter Rotors Nakamoto
  • 2003-2004 GMC Sierra 1500 Front & Rear Brake Rotor 4 Piece Set for Models with 6 Lug Wheels with Dual Piston Rear Calipers Nakamoto
  • 2005-2006 GMC Sierra 1500 Front & Rear Brake Rotor 4 Piece Set for Models with 6 Lug Wheels with Dual Piston Rear Calipers & 4 Wheel Disc Brakes Nakamoto
  • 2007 GMC Sierra 1500 Classic Front & Rear Brake Rotor 4 Piece Set for Models with 6 Lug Wheels with Dual Piston Rear Calipers & 4 Wheel Disc Brakes Nakamoto
  • 2000 GMC Yukon Front & Rear Brake Rotor 4 Piece Set for Models with Limited Slip Rear Axle & 13" (330mm) Diameter Rotors (excluding Denali Models) Nakamoto
  • 2001-2002 GMC Yukon Front & Rear Brake Rotor 4 Piece Set for Models with Limited Slip Rear Axle & 13" (330mm) Diameter Rotors Nakamoto
  • 2003-2006 GMC Yukon Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2000-2006 GMC Yukon XL 1500 Front & Rear Brake Rotor 4 Piece Set Nakamoto

This part replaces:

  • OE # 15716362
  • OE # 18060214
  • OE # 25757802
  • Nakamoto 55054, 55067
Part #: 1ABFS01418


Nakamoto
Brand #: 55054, 55067

How-to Video:

(06:50 min)