Replaces

Brake Rotor Nakamoto 52010080AE, 52009968AC - 1ABFS01419

These brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Replaces dealer part numbers: 52009968AC, 52009968AA, 52009968AB, 52010080AA, 52010080AB, 52010080AC, 52010080AE
  • Fit 5 Stud Wheels
  • FRONT Rotor - 13.2" Diameter
  • REAR Rotor - 13.86" Diameter

These brake rotors make great replacements and have excellent value over the price of dealer brake rotors.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:17)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the calipers (1:50)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 13mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 13/16 inch bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Install new rotor and pads (6:10)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 110 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 25 ft lbs.
  4. step : Put wheel back on (10:40)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 120 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (11:00)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Very pleased
These were a perfect fit for my 2006 dodge ram 1500. I am anxious to see how they last long term. The quality seems very high. Such a great value!
February 22, 2018
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007-2009 Chrysler Aspen Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2004-2009 Dodge Durango Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2002-2003 Dodge Ram 1500 Truck Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2004-2005 Dodge Ram 1500 Truck Front & Rear Brake Rotor 4 Piece Set (excluding SRT-10) Nakamoto
  • 2006 Dodge Ram 1500 Truck Front & Rear Brake Rotor 4 Piece Set (excluding SRT-10 & Mega Cab) Nakamoto
  • 2007-2008 Dodge Ram 1500 Truck Regular Cab Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2007-2008 Dodge Ram 1500 Truck Quad Cab Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2009-2010 Dodge Ram 1500 Truck Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2011-2014 Ram 1500 Truck Front & Rear Brake Rotor 4 Piece Set Nakamoto

This part replaces:

  • Nakamoto 52010080AE, 52009968AC
Part #: 1ABFS01419

Nakamoto
Brand #: 52010080AE, 52009968AC

How-to Video:

(11:30 min)