Replaces

Brake Rotor Nakamoto 31043-DSZ, 31247-DSZ - 1APBS00388

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Front Brake Rotor Specifications:
      Vented
      10.87" (276mm)
      5 Lug
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Quantity:   4 Piece Set
  • Brake Rotor Coating:   Zinc Coated
  • Rear Brake Rotor Specifications:
      Solid
      10.47" (266mm)
      5 Lug
  • Product Line:   Performance

Specifications:

  • Comes as a Set of 4
    • Includes both LH (Driver) & RH (Passenger) Side Front & Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:23)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull of the wheel
  2. step : Inspecting the Brakes (1:37)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gauges on both sides of the rotor
    • Check the thickness of the brake pads
  3. step : Removing the Brakes (2:56)
    • Remove the 14mm bolts from the caliper
    • Slide the boots in
    • Pull off the caliper
    • Slide out the brake pads
    • Check the caliper slides for smooth movement
    • If necessary clean the slides with a wire brush and grease them
    • Pull the brake pad retainers off the caliper bracket
    • If reusing the retainers, clean them with a wire brush
    • Apply penetrating oil to the 17mm bolts and to the rotor around the lugs
    • Remove the 17mm bolts from the caliper bracket using a breaker bar or pipe for leverage
    • Remove the caliper bracket
    • Pull the rotor off
  4. step : Installing the New Brakes (6:42)
    • Insert the caliper bracket between the rotor and the steering knuckle
    • Start the bolts by hand and tighten them with the ratchet
    • Tighten the bracket bolts to 85 foot-pounds with the torque wrench
    • Push the caliper pistons in using a large C-clamp and the old brake pad
    • Reattach the brake pad retainers
    • Insert the inner brake pad with the wear tab at the bottom
    • Insert the outer pad
    • Put the caliper in place
    • Start the caliper bolts by hand
    • Tighten the caliper bolts to 20 foot-pounds
  5. step : Reattaching the Wheel (10:45)
    • Straighten out the steering knuckle
    • Slide the Wheel into place
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot pounds in a crossing or star pattern
  6. step : Testing the Brakes (11:16)
    • Pump your brakes repeatedly
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Wire Brush
  • Large C-Clamp
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 17mm Socket

4.50/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Was very satisfied with what came , shipped fast , high quality , and got all 4 performance rotors for the price of 1 OEM rotor from Autozone
August 6, 2017
Wrong part
Somehow I received the wrong part for my Outback. Their customer service representatives were friendly and helpful with my return and new order.
May 23, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2006Saab 9-2X Saab 9-2X Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
1998-2002Subaru Forester Subaru Forester Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
1998-2001Subaru Impreza Subaru Impreza RS Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2002-2007Subaru Impreza Subaru Impreza Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
2002-2007Subaru Impreza Outback Subaru Impreza Outback Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set Performance Nakamoto
1997-1998Subaru Legacy Subaru Legacy Cross Drilled & Slotted Zinc Coated Brake Rotor H4 2.5L 4 Piece Set Front & Rear Performance Nakamoto
1999Subaru Legacy Subaru Legacy Front & Rear Cross Drilled & Slotted Zinc Coated Brake Rotor 4 Piece Set for Models with 10.9" (277mm) Diameter Front Rotors Performance Nakamoto
Part #: 1APBS00388


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 31043-DSZ, 31247-DSZ

How-to Video:

(11:47 min)