Specifications:

  • Comes as a Set of 4
    • Includes both LH (Driver) & RH (Passenger) Side Front & Rear
  • Direct replacements
  • Fits 6 Stud Wheels
  • 12.99" (330mm) diameter front vented
  • 13.56" (344mm) diameter rear vented
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Quantity: 4 Piece Set
  • Front Brake Rotor Specifications: Vented
  • Rear Brake Rotor Specifications: 6 Lug
  • Front Brake Rotor Specifications: 12.99" (330mm)
  • Front Brake Rotor Specifications: 6 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:07)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:25)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:47)
    • Remove the two 19mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • If only changing the pads, continue to Step 6 and install the new pads
  4. step : Removing the Brake Rotor (2:44)
    • Remove bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, douse the back side with penetrating oil and use two M10 bolts to press the rotor off
  5. step : Installing the New Brake Rotor (4:08)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Clean the caliper bracket with a wire brush
    • Remove the brake pad slides
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
    • Put the bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
  6. step : Installing the New Brake Pads (5:32)
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Grease the brake pads
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 50 foot-pounds of torque
  7. step : Reattaching the Wheel (7:29)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (7:53)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Floor Jack
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Fluid
  • Mineral Spirits
  • Brake Parts Cleaner
  • Rust Penetrant
  • White Grease
  • M10 x 7cm bolts

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)

  • Sockets - Metric

  • 22mm Socket
  • 19mm Socket
  • 18mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007-2016 Cadillac Escalade Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2007-2016 Cadillac Escalade ESV Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2007-2013 Cadillac Escalade EXT Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2007-2013 Chevy Avalanche 1500 Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2007 Chevy Silverado 1500 New Body Style Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2008-2017 Chevy Silverado 1500 Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2007-2013 Chevy Suburban 1500 Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2007-2016 Chevy Tahoe Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2007 GMC Sierra 1500 New Body Style Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2008-2016 GMC Sierra 1500 Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2007-2016 GMC Yukon Front & Rear Brake Rotor 4 Piece Set Nakamoto
  • 2007-2013 GMC Yukon XL 1500 Front & Rear Brake Rotor 4 Piece Set Nakamoto

This part replaces:

  • Nakamoto 25832103, 55097
Part #: 1ABFS03007

Nakamoto
Brand #: 25832103, 55097

How-to Video:

(08:17 min)