Replaces

Brake Rotor Front Pair Nakamoto 55079-DSZ - 1APBR00384

Specifications:

  • Comes as a Pair
    • Includes LH (Driver Side) & RH (Passenger Side) Front
  • Cross drilled, Slotted, And Zinc Coated
  • Direct replacement
  • Fits 6 Stud Wheels
  • 12.8" (325mm) diameter
Zinc Coated

Zinc Coated to help reduce rust and corrosion for a longer-lasting and better looking rotor

"True" Non-Interference Vane Design

"True" Non-Interference Vane Design retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots are machined to remove brake dust and expel gasses during hard braking

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:24)
    • Remove the center cap with a screwdriver
    • Take the plastic lug covers off.
    • With a 19 mm socket and ratchet or lug wrench, loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts.
    • Remove the wheel and set aside.
  2. step : Remove the brakes (1:39)
    • Use a 13 mm socket to remove the calipers.
    • Pry up the brake pads with your flat blade screwdriver.
    • Check the life of your rotors by checking for grooves and wear.
    • Use your 18 mm socket and ratchet to remove the caliper brackets.
    • Remove the rotors if needed.
  3. step : Install the new brakes (4:32)
    • Clean your rotors with brake parts cleaner and put them on the hub.
    • Apply anti-seize grease to the edges of the brake pads where they slide into the calipers.
    • Compress your caliper pistons with a large C-Clamp
    • Clean up your caliper bolts and apply a little anti-seize grease to them.
    • Put your caliper brackets back on.
    • Put the brake pads into the caliper brackets and then the caliper.
    • Put the caliper bolts into your brackets, with the one with the bushing on the bottom.
    • Torque the caliper bracket bolts to 90 ft lbs, and the caliper bolts to 25.
  4. step : Put the wheel back on. (8:53)
    • Put the wheel back on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100-120 ft lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Wire Brush
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 13mm Wrench
  • 19mm Wrench
  • 18mm Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Fit right in. Great and convenient Web site with YouTube videos to go with the product!
December 2, 2017
Purchased
7 months ago
04 Gmc Envoy Rotors
These Rotors improved my truck to drive and stop great and also smoothly, even tho i have inquired many problems with this vehicle.
May 11, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2005 Buick Rainier 7 Passenger Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2006-2007 Buick Rainier without Sport Package V8 5.3L Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2003-2006 Chevy SSR Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2006-2008 Chevy Trailblazer V8 5.3L Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2002-2005 Chevy Trailblazer EXT Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2006 Chevy Trailblazer EXT V8 5.3L Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005-2009 GMC Envoy V8 5.3L Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2002-2005 GMC Envoy XL Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2006 GMC Envoy XL V8 5.3L Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2004-2005 GMC Envoy XUV Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2003-2006 Isuzu Ascender V8 5.3L Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005-2009 Saab 9-7X without Sport Package V8 5.3L Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto

This part replaces:

  • Nakamoto 55079-DSZ
Part #: 1APBR00384


Nakamoto
Brand #: 55079-DSZ

How-to Video:

(09:57 min)