These front brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 19181002
  • Fit 6 Stud Wheels
  • 11.9" Diameter Vented Rotors

These front brake rotors make great replacements and have excellent value over the price of dealer brake rotors.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:24)
    • Remove the center cap with a screwdriver
    • Take the plastic lug covers off.
    • With a 19 mm socket and ratchet or lug wrench, loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts.
    • Remove the wheel and set aside.
  2. step : Remove the brakes (1:39)
    • Use a 13 mm socket to remove the calipers.
    • Pry up the brake pads with your flat blade screwdriver.
    • Check the life of your rotors by checking for grooves and wear.
    • Use your 18 mm socket and ratchet to remove the caliper brackets.
    • Remove the rotors if needed.
  3. step : Install the new brakes (4:32)
    • Clean your rotors with brake parts cleaner and put them on the hub.
    • Apply anti-seize grease to the edges of the brake pads where they slide into the calipers.
    • Compress your caliper pistons with a large C-Clamp
    • Clean up your caliper bolts and apply a little anti-seize grease to them.
    • Put your caliper brackets back on.
    • Put the brake pads into the caliper brackets and then the caliper.
    • Put the caliper bolts into your brackets, with the one with the bushing on the bottom.
    • Torque the caliper bracket bolts to 90 ft lbs, and the caliper bolts to 25.
  4. step : Put the wheel back on. (8:53)
    • Put the wheel back on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100-120 ft lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Wire Brush
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 13mm Wrench
  • 19mm Wrench
  • 18mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Very good part, and the price was great. Arrived quickly and fit perfectly.
November 7, 2017
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2005 Buick Rainier Front Brake Rotor L6 4.2L Pair Nakamoto
  • 2002-2005 Chevy Trailblazer Front Brake Rotor Pair Nakamoto
  • 2002-2004 GMC Envoy Front Brake Rotor Pair Nakamoto
  • 2005 GMC Envoy Front Brake Rotor L6 4.2L Pair Nakamoto
  • 2003-2005 Isuzu Ascender Front Brake Rotor L6 4.2L Pair Nakamoto
  • 2002-2004 Olds Bravada Front Brake Rotor Pair Nakamoto

This part replaces:

  • Nakamoto 55069
Part #: 1ABFS00261



Nakamoto
Brand #: 55069

How-to Video:

(09:57 min)