Replaces

Brake Rotor Front Pair Nakamoto 53022-DSZ - 1APBR00009

Part Details

  • Front Brake Rotor Specifications:
    Vented
    5 Lug
    12.60" (320mm)
  • Brake Rotor Type: Cross Drilled & Slotted
  • Quantity: Pair
  • Brake Rotor Coating: Zinc Coated
  • Front or Rear Location: Front
  • Product Line: Performance

These front performance brake rotors are just what you need to get your vehicle stopping great again!

Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side FRONT
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part numbers: 4779196AA, 4779196AB, 4779196AD
  • Fits 5 Stud Wheels
  • Size: 12.6" x 1.1" (320mm x 28mm)

 

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:31)
    • Hold the wheel studs with a brake rotor
    • Remove the two 13mm bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (1:55)
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Preparing the New Brake Pads and Rotors (3:14)
    • Pry off the brake pad shims with a flat blade screwdriver
    • Clean the brake pad shims with a wire brush
    • Clean the caliper bracket with a wire brush
    • Apply brake grease to the shim-mounting area of the caliper bracket
    • Place the shim onto the caliper bracket
    • Apply grease to the caliper shims
    • Pull out the caliper slides
    • Apply grease to the caliper slides
    • Push the caliper slide into the caliper
  5. step : Installing the Brake Rotor (5:36)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two 18mm bolts into the caliper bracket
    • Tighten the two 18mm bolts to 70 foot-pounds of torque
  6. step : Installing the Brake Pads (7:05)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two 13mm bolts into the caliper
    • Tighten the two 13mm bolts to 44 foot-pounds of torque
  7. step : Reattaching the Wheel (8:08)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Anti-Seize Grease
  • Gloves
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Good buy
The items i purchased were sent fast and arrived within a week. They were clean packaged well and fit my car the way they were supposed to. Please note: THESE ROTORS WILL NOT FIT DODGE CAR MODELS THAT HAVE PERFORMANCE PACKAGE ROTORS ON THE FRONT END.
July 26, 2018
Purchased
3 months ago
Good price for slotted and drilled rotors
Exact fit, great price, stop well. Hopefully they will cure rotor warping problem I had with plain rotors due to heat build up.
September 13, 2017
Purchased
1 year ago
great customer service
recently purchased a set of front brake rotors, for whatever reason one of the rotors failed, i notified 1A, explained the situation and they immediately resolved the issue by replacing the part. to that, the parts i am satisfied with, they are a exactly as i expected, but the service deserves an applause.
June 23, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with 12.6" (320mm) Diameter Rotors Performance Nakamoto
2009-2016Dodge Challenger Dodge Challenger Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with 12.6" (320mm) Diameter Rotors Performance Nakamoto
2006-2016Dodge Charger Dodge Charger Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with 12.6" (320mm) Diameter Rotors Performance Nakamoto
2005-2008Dodge Magnum Dodge Magnum Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with 12.6" (320mm) Diameter Rotors Performance Nakamoto

This part replaces:

  • Nakamoto 53022-DSZ
Part #: 1APBR00009


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 53022-DSZ

How-to Video:

(08:37 min)