Replaces

Brake Rotor Front Pair Nakamoto 3295-DSZ - 1APBR00020

These front performance brake rotors are just what you need to get your vehicle stopping great again!

Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side FRONT
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part numbers: 45251S6DE10, 45251CC900, 45251K7A00, 45251 S6D E10, 45251 SCC 900, 45251 SK7 A00
  • Fits 4 Lug Wheels
  • 10.3" diameter
  • Vented

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:48)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (1:52)
    • Remove the two Phillips screws from the rotor
    • Unbolt the two 12mm caliper bolts from the caliper bracket
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Remove the brake pads
    • Unbolt the 17mm bolts from the caliper bracket
    • Remove the caliper bracket
    • Remove the rotor
  3. step : Installing the New Brake Pads and Rotor (4:30)
    • Clean the rotor with brake parts cleaner
    • Mount your new rotor onto the hub
    • Apply a dab of anti-seize grease to the Phillips screws
    • Tighten the Phillips screws to the rotor
    • Clean the brake pad slides with a wire brush
    • Mount the caliper bracket onto the rotor
    • Apply grease to the brake pad tabs
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Apply grease to the caliper bolts
    • Thread bolts by hand
    • Torque the caliper bracket bolts and the caliper bolts to 74 foot-pounds
  4. step : Reattaching the Wheel (8:20)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:07 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 19mm Socket



This part replaces:

  • Nakamoto 3295-DSZ

Vehicle Fit

  • 1997-2005 Acura EL Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1990-1996 Acura Integra Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1997-1998 Acura Integra Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair excluding Type R Models Performance Nakamoto
  • 1999 Acura Integra Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2000-2001 Acura Integra Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair excluding Type R Models Performance Nakamoto
  • 1990-1992 Honda Civic EX Sedan Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1993-2000 Honda Civic EX Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1994-1995 Honda Civic LX Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with ABS Brakes Performance Nakamoto
  • 1994-1995 Honda Civic SI Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with ABS Brakes Performance Nakamoto
  • 1996 Honda Civic LX Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with Automatic Transmission with ABS Brakes Performance Nakamoto
  • 1999-2000 Honda Civic SI Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2001-2003 Honda Civic Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2004-2005 Honda Civic Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair excluding SI Models Performance Nakamoto
  • 1993-1997 Honda Civic Del Sol SI Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with ABS Brakes Performance Nakamoto
  • 1994-1997 Honda Civic Del Sol VTEC Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2007-2014 Honda FIT Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2010-2014 Honda Insight Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
Part #: 1APBR00020

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: 3295-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More