Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Front Brake Rotor Specifications:
      Vented
      10.51" (267mm)
      5 Lug
  • Quantity:   Pair
  • Front or Rear Location:   Front

Specifications:

  • Come as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 8-19152-699-0, 8191526990, 19152699
  • Fits 5 Stud Wheels
    • Studs already installed
  • Only fits 2WD Models
    • Does not fit 4WD Models
  • Includes ABS ring (already installed)

Note:
The rotors do not include wheel bearings or seals.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheels and brakes (0:45)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel
    • Compress the caliper piston with a flat blade screwdriver or pry bar
    • Use your 3/8 Allen Wrench to unbolt the caliper.
    • Secure the caliper with wire ties out of the way.
    • Remove the cotter pin from the hub nut
    • Use a 27 mm socket to unbolt the bearing assembly and remove the rotor.
  2. step : Remove and replace the wheel bearing and races. (4:05)
    • Use your race installation tools and a hammer to remove the bearing races.
    • Install the new race with your installation tools, driving them straight down in straight, even and firmly.
    • Apply wheel bearing grease and coat the inside of the hub and a light coat on the race.
    • Apply wheel bearing grease to the bearing and the roller.
    • Make sure there aren’t any big globs.
    • Install the seal with a bearing installer or block of wood and hammer.
    • Check the spindle for wear.
    • Apply grease to the outer bearing.
    • Put the rotor on and install the outer bearing.
    • Use your ratchet to tighten the hub up a little, rotating the rotor to seat the bearing.
    • Install the nut and cotter pin, and cover the spindle and nut with the dust cap.
  3. step : Install the brakes (14:53)
    • For more detailed instructions, see our other instructional materials.
    • Reassemble the calipers, and put the wheel back on.
    • Lower the vehicle and torque the lug nuts in accordance with manufacturer specs.
    • Pump the brakes a few times before road testing to recompress the caliper pistons.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Block of Wood

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 27mm socket

  • Specialty Tools

  • Race Installation Tools

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1991Chevy Blazer S10 Chevy Blazer S10 Rear Wheel Drive Front Brake Rotor for Models with ABS Brakes Pair Nakamoto
1992-1997Chevy Blazer S10 Chevy Blazer S10 Rear Wheel Drive Front Brake Rotor Pair Nakamoto
1994-1995Chevy S10 Pickup Chevy S10 Pickup Rear Wheel Drive Front Brake Rotor V6 4.3L Pair Nakamoto
1996-2003Chevy S10 Pickup Chevy S10 Pickup Rear Wheel Drive Front Brake Rotor Pair Nakamoto
1991GMC Jimmy S-15 GMC Jimmy S-15 Rear Wheel Drive Front Brake Rotor for Models with ABS Brakes Pair Nakamoto
1992-1997GMC Jimmy S-15 GMC Jimmy S-15 Rear Wheel Drive Front Brake Rotor Pair Nakamoto
1994-1995GMC S-15 Sonoma GMC S-15 Sonoma Rear Wheel Drive Front Brake Rotor V6 4.3L Pair Nakamoto
1996-2003GMC S-15 Sonoma GMC S-15 Sonoma Rear Wheel Drive Front Brake Rotor Pair Nakamoto
1996-1997Isuzu Hombre Isuzu Hombre Front Brake Rotor Pair Nakamoto
1998-2000Isuzu Hombre Isuzu Hombre Rear Wheel Drive Front Brake Rotor Pair Nakamoto
Part #: 1ABFS00186


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 31254

How-to Video:

(16:47 min)