Replaces

Brake Rotor Front Pair Nakamoto 31254-DSZ - 1APBR00065

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Front Brake Rotor Specifications:
      Vented
      10.51" (267mm)
      5 Lug
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Quantity:   Pair
  • Brake Rotor Coating:   Zinc Coated
  • Front or Rear Location:   Front
  • Product Line:   Performance

These performance brake rotors are just what you need to get your vehicle stopping great again!

Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part numbers: 8-19152-699-0, 8191526990, 19152699
  • Fits 5 Stud Wheels
  • Studs already installed
  • Only fits 2WD Models
  • Does not fit 4WD Models
  • Includes ABS ring (already installed)

Note:
The rotors do not include wheel bearings or seals. You will need to reuse your originals.

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Reassemble the bearings. (0:30)
    • Use race installation tools or a block of wood to assemble the inner bearing.
    • Pack the outer bearing with bearing grease.
    • Inspect the spindle and clean it with a paper towel.
    • Mount the rotors and insert the outer bearing.
    • thread your washer and bolt on.
    • Tighten the bolt some with your ratchet and then loosen it; this will seat the outer bearing.
    • Put the nut and dust cap on.
  2. step : Install the new brakes (5:09)
    • Clean the brake rotors with brake cleaner.
    • Clean the caliper sleeves with a wire brush.
    • Apply anti-seize grease to the edges of the brake pads where they slide into the calipers.
    • Compress your caliper pistons with a large C-Clamp
    • Put the brake pads into the caliper.
    • Mount the caliper.
    • Clean up your caliper bolts and apply a little anti-seize grease to them.
    • Torque the caliper bolts to 45 ft lbs.
  3. step : Put the wheel back on (8:53)
    • Thread the lug nuts on
    • Lower the vehicle
    • Torque the lug nuts in a star pattern to 100 ft lbs

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Block of Wood
  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket
  • 27mm socket

  • Specialty Tools

  • Race Installation Tools

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do these come with the bearing race installed?
Jesse W October 23, 2018
This will not include the race bearing.
Emma F October 23, 2018
Year Make Model Description
1991Chevy Blazer S10 Chevy Blazer S10 Rear Wheel Drive Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with ABS Brakes Performance Nakamoto
1992-1997Chevy Blazer S10 Chevy Blazer S10 Rear Wheel Drive Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
1994-1995Chevy S10 Pickup Chevy S10 Pickup Rear Wheel Drive Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair V6 4.3L Performance Nakamoto
1996-2003Chevy S10 Pickup Chevy S10 Pickup Rear Wheel Drive Front Brake Rotor Cross Drilled & Slotted Zinc Coated Pair Performance Nakamoto
1991GMC Jimmy S-15 GMC Jimmy S-15 Rear Wheel Drive Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with ABS Brakes Performance Nakamoto
1992-1997GMC Jimmy S-15 GMC Jimmy S-15 Rear Wheel Drive Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
1994-1995GMC S-15 Sonoma GMC S-15 Sonoma Rear Wheel Drive Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair V6 4.3L Performance Nakamoto
1996-2003GMC S-15 Sonoma GMC S-15 Sonoma Rear Wheel Drive Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
1996-1997Isuzu Hombre Isuzu Hombre Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
1998-2000Isuzu Hombre Isuzu Hombre Rear Wheel Drive Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
Part #: 1APBR00065


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 31254-DSZ

How-to Video:

(09:53 min)