Replaces

Brake Rotor Front Pair Nakamoto 18060691 - 1ABFS00543

These front brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 18060691, 15733699, 18060219
  • Fit 5 Lug Wheels
  • 10.76" (275mm) Diameter Vented Rotors

These brake rotors make great replacements and have excellent value over the price of dealer brake rotors.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Front or Rear Location: Front
  • Quantity: Pair
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 5 Lug
  • Front Brake Rotor Specifications: 10.79" (274mm)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:09)
    • Loosen the lug nuts with your 19 mm socket and breaker bar.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the caliper, pads and rotors (1:26)
    • Observe your brake pads and rotors; check the wear indicator on the pads and look for deep gouges or excessive wear on the rotors.
    • Unbolt the 18 mm caliper bolts.
    • Use a large flat blade screwdriver to compress the caliper piston to pull the caliper off the rotor.
    • Remove the brake pads.
    • Take your 19 mm socket and breaker bar to unbolt the caliper bracket bolts.
    • Remove and discard your old rotor.
  3. step : Replace your pads and rotors (5:11)
    • Clean your rotor with brake parts cleaner and place it on the hub.
    • Bolt down the caliper bracket with your 19 mm socket and ratchet.
    • Torque the 19 mm bolts to 100 ft lbs.
    • Dab a bit of anti-seize grease to the edges of the brake pads and place them into the caliper brackets against the rotors.
    • Compress your brake caliper piston with a large c-clamp.
    • Mount the brake caliper onto the caliper bracket.
    • Bolt the caliper down with an 18 mm socket and ratchet.
    • Torque the 18 mm bolts to 55 ft lbs.
  4. step : Replace the wheel (8:46)
    • Put the wheel back on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs in a star pattern.
    • Pump the brakes a few times and do a few 5-10 mph stops in the driveway before test driving the vehicle.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
where were tsesee made?
gary r on May 18, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

Vehicle Fit

  • 1997 Chevy Blazer S10 4 Wheel Drive Front Brake Rotor for Models with 4 Wheel Disc Brakes Pair Nakamoto
  • 1998-2005 Chevy Blazer S10 Front Brake Rotor Pair Nakamoto
  • 1998-2003 Chevy S10 Pickup 4 Wheel Drive Front Brake Rotor Pair Nakamoto
  • 2004 Chevy S10 Pickup Front Brake Rotor Pair Nakamoto
  • 1998-2000 GMC Envoy Front Brake Rotor Pair Nakamoto
  • 1997 GMC Jimmy S-15 4 Wheel Drive Front Brake Rotor for Models with 4 Wheel Disc Brakes Pair Nakamoto
  • 1998-2001 GMC Jimmy S-15 Front Brake Rotor Pair Nakamoto
  • 1998-2003 GMC S-15 Sonoma 4 Wheel Drive Front Brake Rotor Pair Nakamoto
  • 2004 GMC S-15 Sonoma Front Brake Rotor Pair Nakamoto
  • 1998-2000 Isuzu Hombre 4 Wheel Drive Front Brake Rotor Pair Nakamoto
  • 1997-2001 Olds Bravada Front Brake Rotor Pair Nakamoto

This part replaces:

  • Nakamoto 18060691
Part #: 1ABFS00543

Nakamoto
Brand #: 18060691

How-to Video:

(09:35 min)