• Brand New OEM ceramic brake pad
  • 4 Piece Front Brake Pad Set
  • Includes shims
  • Original equipment parts
OEM Part

Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.

Part Details

  • Brake Pad Friction Material: Ceramic

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Remove hub cap
    • While your car is still on the ground, use your 21mm socket to loosen your lug nuts
    • Jack up and secure your car with jack stands
    • Remove the lug nuts with your 21mm socket and ratchet
    • Remove the wheel and set aside
  2. step : Removing the Calipers (1:30)
    • Remove the 14mm bolts to remove the calipers
    • Use a wire tie to fasten the caliper out of the way
    • Use your screwdriver to pry out your brake pads
    • Use your 17mm socket and ratchet to remove your caliper brackets to access the rotors
    • Pull off the brake rotor
  3. step : Installing the New Rotor and Pads (3:57)
    • Clean new rotor with brake cleaner
    • Check your caliper pins to make sure they are in good working order
    • Put your caliper bracket back on, and tighten the 17mm bolts to 80 ft lbs
    • Insert your new pads into the brackets
    • Use your C-clamp or caliper tool to compress your caliper
    • Place your caliper onto the bracket
    • Tighten your 14mm bolts to 25 ft lbs
  4. step : Reinstalling the Wheel (8:10)
    • Make sure to use a star pattern when putting your wheel lugs back on
    • Tighten to 100 ft lbs
    • Replace hubcap
  5. step : Test and Set Brakes (7:46)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place
    • Test the brakes in your driveway before taking the car onto the road
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph
    • Obviously this is best done on a straight back road without any traffic

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2003 Lexus ES300 Front Ceramic Brake Pads Toyota OEM 04465-AZ006-TM
  • 2004-2006 Lexus ES330 Front Ceramic Brake Pads Toyota OEM 04465-AZ006-TM
  • 2005-2006 Toyota Camry Front Ceramic Brake Pads V6 3.0L Toyota OEM 04465-AZ006-TM
  • 2005-2006 Toyota Camry Front Ceramic Brake Pads V6 3.3L Toyota OEM 04465-AZ006-TM
  • 2004-2010 Toyota Sienna Front Ceramic Brake Pads Toyota OEM 04465-AZ006-TM
  • 2004-2008 Toyota Solara Front Ceramic Brake Pads Toyota OEM 04465-AZ006-TM
  • 2005-2015 Toyota Tacoma 2 Wheel Drive Front Ceramic Brake Pads 5 Lug Wheels Toyota OEM 04465-AZ006-TM

This part replaces:

  • Toyota OEM 04465-AZ006-TM
  • OE # 04465AZ006TM, 0446508030
Only 3 left in stock
Part #: TYBPS00006

Brand #: 04465-AZ006-TM

How-to Video:

(09:00 min)