Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Brake Pad Friction Material: Ceramic
  • Front or Rear Location: Rear
  • Brake Pad Features & Benefits:
    OE Grade Multi-Layer Shim
    Positive Mold Technology
    Environmentally Compliant
    Thermal Scorched

Specifications:

  • Premium Posi Ceramic brake pads
  • 4 Piece Rear brake pad set
  • Includes shims
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:15)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 19mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 19mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the rear brake calipers (1:46)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 14mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 18mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Screw in the two 10M bolts to remove the rotor.
    • Take care not to damage the lug studs.
  3. step : Install new rear brake rotor and pads (6:30)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 90-100 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 15-20 ft lbs.
  4. step : Put the rear wheel back on (10:25)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 100 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (11:00)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • M10 x 7cm bolts
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 18mm Socket
  • 19mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Best choice
All the parts I have bought have a few things in common. They fit, they are as shown, the price is right, and the delivery time is always right on. I am one very satisfied customer.
May 4, 2018
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
are these brake pads dust free ?
kenny s on May 31, 2017
BEST ANSWER: No brake pads are "dust free," but ceramic pads tend to create less dust than traditional semi-metallic pads!

Vehicle Fit

Year Make Model Description
2008-2017Buick Enclave Buick Enclave Rear Premium Posi Ceramic Brake Pads Nakamoto
2004-2007Buick Rainier Buick Rainier Rear Premium Posi Ceramic Brake Pads Nakamoto
2013-2018Cadillac XTS Cadillac XTS with RPO Code J55 (Heavy Duty Brakes) with 6 Lug Wheels Premium Posi Brake Pads Rear Ceramic Nakamoto
2004-2006Chevy SSR Chevy SSR Rear Premium Posi Ceramic Brake Pads Nakamoto
2002-2009Chevy Trailblazer Chevy Trailblazer Rear Premium Posi Ceramic Brake Pads Nakamoto
2002-2006Chevy Trailblazer EXT Chevy Trailblazer EXT Rear Premium Posi Ceramic Brake Pads Nakamoto
2009-2017Chevy Traverse Chevy Traverse Rear Premium Posi Ceramic Brake Pads Nakamoto
2007-2017GMC Acadia GMC Acadia Rear Premium Posi Ceramic Brake Pads Nakamoto
2017GMC Acadia Limited GMC Acadia Limited Premium Posi Brake Pads Rear Ceramic Nakamoto
2002-2009GMC Envoy GMC Envoy Rear Premium Posi Ceramic Brake Pads Nakamoto
2002-2006GMC Envoy XL GMC Envoy XL Rear Premium Posi Ceramic Brake Pads Nakamoto
2004-2005GMC Envoy XUV GMC Envoy XUV Rear Premium Posi Ceramic Brake Pads Nakamoto
2003-2008Isuzu Ascender Isuzu Ascender Rear Premium Posi Ceramic Brake Pads Nakamoto
2002-2004Oldsmobile Bravada Olds Bravada Rear Premium Posi Ceramic Brake Pads Nakamoto
2005-2009Saab 9-7X Saab 9-7X Rear Premium Posi Ceramic Brake Pads Nakamoto
2007-2010Saturn Outlook Saturn Outlook Rear Premium Posi Ceramic Brake Pads Nakamoto

This part replaces:

  • Nakamoto CD883
Part #: 1ABPS00646


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD883

How-to Video:

(11:30 min)