This rear brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • Ceramic Enhanced
  • 4 Piece Rear brake pad set
  • Includes shims
  • Direct replacement

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:59)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull of the wheel
    • If the wheel will not come off, thread the lug nuts on and strike the tire with a hammer
  2. step : Inspecting the Brakes (1:59)
    • Check the thickness of the brake pads
    • Check for gauges on both sides of the rotor
  3. step : Removing the Brake Pads (2:15)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
    • Clean the slides with a wire brush
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
    • If only changing the pads, continue to Step 6 and install the new pads
  4. step : Removing the Brake Rotor (4:52)
    • Remove two 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 Torx screw from the rotor
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  5. step : Installing the New Brake Rotor (7:51)
    • Slide the rotor on
    • Adjust the emergency brake, if necessary
    • Put the bracket back into place, start the 15mm bolts by hand
    • Tighten the 15mm bolts to between 75 and 80 foot-pounds of torque
  6. step : Installing the New Brake Pads (9:31)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket with the wear indicator on the lower side
    • Put the caliper on
    • Thread the 14mm bolts by hand
    • Tighten the 14mm bolts to between 20-22 foot-pounds
    • If you replaced the rotor, reinstall the T30 Torx bolt
    • Clean the rotor with brake parts cleaner or mineral spirits
  7. step : Reattaching the Wheel (12:39)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (13:12)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Hammer
  • Jack Stands
  • Sledge Hammer
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Mineral Spirits
  • Brake Parts Cleaner
  • Cloth Rags
  • White Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 15mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

  • Wrenches - Metric

  • 14mm Wrench
  • 15mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Brake pads
1A Auto is number one company. Parts are excellent and the staff are Awesome ! I recommend this company to anyone looking for the best of the best in aout parts. Thank you.
February 22, 2018
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2012-2015 Chevy Captiva Sport Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2007-2017 Chevy Equinox Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2010-2017 GMC Terrain Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2007-2009 Pontiac Torrent Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2008-2010 Saturn Vue Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2007-2009 Suzuki XL-7 Rear Premium Posi Ceramic Brake Pads Nakamoto

This part replaces:

  • Nakamoto CD1275
Part #: 1ABPS00387

Nakamoto
Brand #: CD1275

How-to Video:

(13:39 min)