Specifications:

  • Professional grade Semi-Metallic brake pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacements

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:48)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (1:52)
    • Remove the two Phillips screws from the rotor
    • Unbolt the two 12mm caliper bolts from the caliper bracket
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Remove the brake pads
    • Unbolt the 17mm bolts from the caliper bracket
    • Remove the caliper bracket
    • Remove the rotor
  3. step : Installing the New Brake Pads and Rotor (4:30)
    • Clean the rotor with brake parts cleaner
    • Mount your new rotor onto the hub
    • Apply a dab of anti-seize grease to the Phillips screws
    • Tighten the Phillips screws to the rotor
    • Clean the brake pad slides with a wire brush
    • Mount the caliper bracket onto the rotor
    • Apply grease to the brake pad tabs
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Apply grease to the caliper bolts
    • Thread bolts by hand
    • Torque the caliper bracket bolts and the caliper bolts to 74 foot-pounds
  4. step : Reattaching the Wheel (8:20)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2013-2014 Acura ILX Hybrid Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2002-2006 Acura RSX excluding Type S Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2011-2015 Honda CR-Z Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1993-1995 Honda Civic EX Coupe without ABS Brakes Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2004-2005 Honda Civic SI Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1994-1997 Honda Civic Del Sol VTEC Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2007-2012 Honda FIT Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2013-2014 Honda FIT excluding Electric Vehicle Front Premium Posi Semi-Metallic Brake Pads Nakamoto

This part replaces:

  • Nakamoto MD948
Part #: 1ABPS00413

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD948

How-to Video:

(10:07 min)