Specifications:

  • Premium Posi Semi Metallic Disc Brake Pads
  • 4 Piece rear brake pad set
  • Includes shims
  • Direct replacements

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:29)
    • Pry the pads into the caliper with a pry bar to reset the pistons
    • Remove the two 10mm bolts from the brake caliper
    • Pull the caliper aside
    • Unclip the brake pads from the caliper
    • Pull the brake pads out of the caliper
  3. step : Inspecting the Brakes (3:03)
    • Check the thickness of the brake pads
    • Check that the brake caliper slides move smoothly
    • Check for gouges on both sides of the brake rotor
  4. step : Removing the Brake Rotor (3:44)
    • Slide off the brake rotor
    • If the rotor does not come off easily, adjust the emergency brake
    • Pull off the rubber plug from the backing plate with a flat blade screwdriver
    • Turn the star wheel adjuster down with a brake spoon
  5. step : Installing the New Brake Rotor (5:10)
    • Slide on the brake rotor
    • Turn the star wheel adjuster up with a brake spoon, while turning the rotor
    • Push the rubber plug into the backing plate
  6. step : Installing the New Brake Pads (5:41)
    • Push the brake pads into the caliper
    • Put the caliper into place
    • Start the 10mm bolts into the caliper
    • Tighten the 10mm bolts to about 20 foot-pounds of torque
  7. step : Reattaching the Wheel (7:59)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 90 - 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket

  • Specialty Tools

  • Brake Spoon

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:54 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket

  • Specialty Tools

  • Brake Spoon



This part replaces:

  • Hollander MD658
  • Nakamoto MD759
  • Reference Number MD782

Vehicle Fit

  • 1999-2004 Chrysler 300M Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1995-2000 Chrysler Cirrus Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1995-2004 Chrysler Concorde Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1995-2001 Chrysler LHS Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1995-1996 Chrysler New Yorker Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2001-2010 Chrysler PT Cruiser Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1996-2006 Chrysler Sebring Sedan Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1996-2006 Chrysler Sebring Convertible Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1995-2004 Dodge Intrepid Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1995-2005 Dodge Neon Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1995-2006 Dodge Stratus Sedan Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1995-1997 Eagle Vision Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1995-2000 Plymouth Breeze Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1998-2001 Plymouth Neon Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
Part #: 1ABPS00638

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD759

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More