Specifications:

  • Premium Posi Semi-Metallic Brake Pads
  • 4 Piece Front brake pad set
  • Direct replacement
  • Includes shims

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:09)
    • Loosen the lug nuts with your 19 mm socket and breaker bar.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the caliper, pads and rotors (1:26)
    • Observe your brake pads and rotors; check the wear indicator on the pads and look for deep gouges or excessive wear on the rotors.
    • Unbolt the 18 mm caliper bolts.
    • Use a large flat blade screwdriver to compress the caliper piston to pull the caliper off the rotor.
    • Remove the brake pads.
    • Take your 19 mm socket and breaker bar to unbolt the caliper bracket bolts.
    • Remove and discard your old rotor.
  3. step : Replace your pads and rotors (5:11)
    • Clean your rotor with brake parts cleaner and place it on the hub.
    • Bolt down the caliper bracket with your 19 mm socket and ratchet.
    • Torque the 19 mm bolts to 100 ft lbs.
    • Dab a bit of anti-seize grease to the edges of the brake pads and place them into the caliper brackets against the rotors.
    • Compress your brake caliper piston with a large c-clamp.
    • Mount the brake caliper onto the caliper bracket.
    • Bolt the caliper down with an 18 mm socket and ratchet.
    • Torque the 18 mm bolts to 55 ft lbs.
  4. step : Replace the wheel (8:46)
    • Put the wheel back on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs in a star pattern.
    • Pump the brakes a few times and do a few 5-10 mph stops in the driveway before test driving the vehicle.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:35 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench



This part replaces:

  • Reference Number MD726
  • Reference Number MD729
  • Nakamoto MD726, MD729

Vehicle Fit

  • 1997 Chevy Blazer S10 Front & Rear Premium Posi Semi-Metallic Brake Pads 4 Wheel Drive Nakamoto
  • 1998-1999 Chevy Blazer S10 Front & Rear Premium Posi Semi-Metallic Brake Pads 4 Wheel Drive Nakamoto
  • 2000-2005 Chevy Blazer S10 Front & Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1998-2004 Chevy S10 Pickup Front & Rear Premium Posi Semi-Metallic Brake Pads 4 Wheel Drive Nakamoto
  • 1998-2000 GMC Envoy Front & Rear Premium Posi Semi-Metallic Brake Pads 4 Wheel Drive Nakamoto
  • 1997 GMC Jimmy S-15 Front & Rear Premium Posi Semi-Metallic Brake Pads 4 Wheel Drive Nakamoto
  • 1998-1999 GMC Jimmy S-15 Front & Rear Premium Posi Semi-Metallic Brake Pads 4 Wheel Drive Nakamoto
  • 2000-2001 GMC Jimmy S-15 Front & Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1998-2004 GMC S-15 Sonoma Front & Rear Premium Posi Semi-Metallic Brake Pads 4 Wheel Drive Nakamoto
  • 1998-2000 Isuzu Hombre Front & Rear Premium Posi Semi-Metallic Brake Pads 4 Wheel Drive Nakamoto
  • 1997-2001 Olds Bravada Front & Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
Part #: 1ABFS02176

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD726, MD729

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More