Specifications:

  • Premium Posi Semi-Metallic Disc Brake Pads
  • 4 Piece Rear brake pad set
  • Includes shims
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Part Details

  • Brake Pad Bonding Type: Premium Posi

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:27)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (0:49)
    • Remove the 12mm bolt from the brake line bracket
    • Remove the 17mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
    • Clean the slides with a wire brush
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
  3. step : Removing the Brake Rotor (3:06)
    • Remove 14mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Preparing the New Brake Pads and Rotors (6:09)
    • Turn the caliper piston in with needle nose pliers
    • Clean the brake pad slides with a wire brush and brake parts cleaner
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the rotor with brake parts cleaner
  5. step : Installing the New Brake Rotor (9:24)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the caliper bracket back into place
    • Start the 14mm bolts by hand
    • Tighten the bolts to 54 foot-pounds of torque
  6. step : Installing the New Brake Pads (10:33)
    • Place brake grease on the brake pad tab
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Counterhold the caliper slide with a 17mm wrench and tighten with a 12mm socket and ratchet
    • Tighten bolts to 17 foot-pounds
    • Tighten the brake line bracket with a 12mm bolt
  7. step : Reattaching the Wheel (12:25)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 79.6 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket
  8. step : Testing the Brakes (13:08)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Pick
  • Rubber Mallet
  • Floor Jack
  • Center Punch
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bungee Cord
  • Anti-Seize Grease
  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 10mm Socket

  • Specialty Tools

  • Dead Blow Hammer

  • Wrenches - Metric

  • 12mm Wrench
  • 17mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
So far so good
They fit exactly the way they should and seem to be of good quality
March 27, 2018
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Do these rear brake pads fit a 2002 Honda accord sedan ex model?
Cruz479 on Aug 21, 2017
BEST ANSWER: Yes, these will fit your EX model Sedan.

Vehicle Fit

  • 1997-1999 Acura CL Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2001-2005 Acura EL Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2013-2016 Acura ILX Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1997-1998 Acura Integra Type R Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2000-2001 Acura Integra Type R Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1987-1988 Acura Legend Coupe Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1989-1990 Acura Legend Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2002-2006 Acura RSX Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1995-1998 Acura TL Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2004-2008 Acura TSX Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1992-1994 Acura Vigor Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1990-1994 Honda Accord Sedan Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1991-1994 Honda Accord Wagon Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1992-1994 Honda Accord Coupe Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1995-2007 Honda Accord Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2011-2014 Honda CR-Z Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2002-2015 Honda Civic SI Rear Brake Pads Semi-Metallic Premium Posi Nakamoto
  • 2006-2015 Honda Civic EX Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1992-2001 Honda Prelude Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2000-2009 Honda S2000 Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2010-2013 Suzuki Kizashi Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2007-2013 Suzuki SX4 Rear Premium Posi Semi-Metallic Brake Pads Nakamoto

This part replaces:

  • Nakamoto MD537
Part #: 1ABPS00166

Nakamoto
Brand #: MD537

How-to Video:

(13:35 min)