Specifications:

  • Premium Posi SEMI-METALLIC Disc Brake Pads
  • 4 Piece Front Brake Pad Set
  • Includes shims
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Part Details

  • Brake Pad Friction Material: Semi-Metallic
  • Brake Pad Bonding Type: Premium Posi

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Remove center cap
    • While your car is still on the ground, use your 21mm socket to loosen your lug nuts
    • Jack up and secure your car with jack stands
    • Remove the lug nuts with your 21mm socket and ratchet
    • Remove the wheel and set aside
  2. step : Removing the Calipers (1:30)
    • Remove the 14mm bolts to remove the calipers
    • Use a wire tie to fasten the caliper out of the way
    • Use your 17mm socket and ratchet to remove your caliper brackets
    • Pop out your brake pads
  3. step : Install New Pads (4:07)
    • Check your caliper pins to make sure they are in good working order
    • Put your caliper bracket back on, and tighten the 17mm bolts to 70 ft lbs
    • Insert your new pads into the brackets
    • Use your C-clamp or caliper tool to compress your caliper
    • Place your caliper onto the bracket
    • Tighten your 14mm bolts
  4. step : Replacing the Wheel (7:25)
    • Make sure to use a star pattern when putting your wheel lugs back on
    • Tighten to 75-85 ft lbs
    • Replace center cap
  5. step : Testing the Brakes (8:20)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place
    • Test the brakes in your driveway before taking the car onto the road

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997 Acura CL Front Brake Pads L4 2.2L Premium Posi Semi-Metallic Nakamoto
  • 1998-1999 Acura CL Front Brake Pads L4 2.3L Premium Posi Semi-Metallic Nakamoto
  • 1990-1994 Honda Accord Sedan Front Brake Pads for Models with Rear Drum Brakes Premium Posi Semi-Metallic Nakamoto
  • 1993-1997 Honda Accord Coupe Front Brake Pads Premium Posi Semi-Metallic Nakamoto
  • 1995-1997 Honda Accord Sedan Front Brake Pads L4 2.2L Premium Posi Semi-Metallic Nakamoto
  • 1998-2002 Honda Accord Sedan Front Brake Pads L4 2.3L Premium Posi Semi-Metallic Nakamoto
  • 1998-2001 Honda Accord Coupe Front Brake Pads L4 2.3L Premium Posi Semi-Metallic Nakamoto
  • 2002 Honda Accord Coupe Front Brake Pads V6 3.0L Premium Posi Semi-Metallic Nakamoto
  • 1996-2000 Honda Civic EX Front Brake Pads Premium Posi Semi-Metallic Nakamoto
  • 1996-2000 Honda Civic Si Front Brake Pads Premium Posi Semi-Metallic Nakamoto
  • 2001-2003 Honda Civic Front Brake Pads Premium Posi Semi-Metallic (excluding Hybrid Models) Nakamoto
  • 2004-2005 Honda Civic (excluding Hybrid Models) (excluding SI Models) Front Brake Pads Premium Posi Semi-Metallic Nakamoto
  • 2006-2011 Honda Civic (excluding Hybrid Models) (excluding GX Models) Front Brake Pads Premium Posi Semi-Metallic for Models with Rear Drum Brakes Nakamoto
  • 2006-2011 Honda Civic EX Front Brake Pads Premium Posi Semi-Metallic Nakamoto
  • 2010-2014 Honda Insight Front Brake Pads Premium Posi Semi-Metallic Nakamoto

This part replaces:

  • Nakamoto MD465
Part #: 1ABPS00055

Nakamoto
Brand #: MD465

How-to Video:

(09:04 min)