Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Semi-Metallic
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

Specifications:

  • Premium Posi Semi Metallic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacements

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:42)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:04)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:24)
    • Remove 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad brackets
    • If only changing the pads, continue to Step 6 and install the new pads
  4. step : Removing the Brake Rotor (2:07)
    • Remove the 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (2:30)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on
    • Remove the brake pad slides
    • Put the bracket back into place
    • Start the 15mm bolts by hand
    • Tighten the bolts to 65 foot-pounds of torque
  6. step : Installing the New Brake Pads (3:54)
    • Clean the brake pad brackets with a wire brush
    • Push the brackets onto the caliper bracket
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts the 14mm by hand
    • Tighten bolts to 35 foot-pounds
  7. step : Reattaching the Wheel (5:22)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket
  8. step : Testing the Brakes (5:58)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • White Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2007Chevy Cobalt Chevy Cobalt 4 Wheel Disc Brakes Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2006-2007Chevy HHR Chevy HHR Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2008-2011Chevy HHR Chevy HHR (excluding SS Models) Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2008-2010Chevy HHR Chevy HHR SS 4 Wheel Disc Brakes Single Piston Calipers Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2004-2012Chevy Malibu Chevy Malibu Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2007Pontiac G5 Pontiac G5 4 Wheel Disc Brakes 5 Lug Wheels Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2008Pontiac G5 Pontiac G5 L4 2.4L Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2005-2008Pontiac G6 Pontiac G6 Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2007-2008Pontiac G6 Pontiac G6 Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2009-2010Pontiac G6 Pontiac G6 without RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2006-2009Pontiac Solstice Pontiac Solstice Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2007-2009Saturn Aura Saturn Aura Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2005-2007Saturn Ion Saturn Ion Red Line Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2007-2010Saturn Sky Saturn Sky Front Premium Posi Semi-Metallic Brake Pads Nakamoto
Part #: 1ABPS00274


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: MD1160

How-to Video:

(06:18 min)