Specifications:

  • Premium Posi Semi Metallic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacements
  • Includes wear sensor

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:23)
    • Loosen the lug nut covers with the supplied lug nut tool
    • Loosen the 17mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (2:34)
    • Remove the spring retainer from the caliper with a flat blade screwdriver and needle nose pliers
    • Pry off the cap from the caliper bolt
    • Remove the 7mm allen bolts from the caliper
    • Disconnect the brake pad sensor
    • Pull the caliper off
    • Secure the caliper with a bungee cord
    • Remove the brake pads
  3. step : Removing the Brake Rotor (5:30)
    • Remove 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 Torx from the rotor
    • Pull the rotor off
  4. step : Preparing the New Brake Pads and Rotors (9:01)
    • Clean off the caliper bracket with a wire brush
    • Clean off the hub with a wire brush
  5. step : Installing the New Brake Rotor (9:42)
    • Clean the rotor with brake parts cleaner
    • Slide the rotor on
    • Tighten the T30 Torx to the rotor
    • Put the caliper bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 155 newton meters of torque
  6. step : Installing the New Brake Pads (10:50)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Clean the pad surface with brake parts cleaner
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Connect the brake pad sensor
    • Apply brake grease to the slide pin bolts
    • Thread the 7mm Allen slide bolts
    • Tighten bolts to 15 newton meters of torque
    • Press the Allen bolt cover on
    • Tighten the spring to the caliper with needle nose pliers
  7. step : Reattaching the Wheel (14:48)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 120 Newton meters in a crossing or star pattern
    • Tighten the lug nut covers
  8. step : Testing the Brakes (15:52)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bungee Cord
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T30 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2013 Audi A3 Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2006-2013 Audi A3 Quattro Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2008-2009 Audi TT 2 Wheel Drive Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2009-2015 Audi TT Quattro Quattro Front Premium Posi Semi-Metallic Brake Pads for Models with 12.28" (312mm) Diameter Rotors Nakamoto
  • 2012-2018 VW Beetle Semi-Metallic Premium Posi Brake Pads Front Nakamoto
  • 2009-2017 VW CC Front Wheel Drive Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2007-2016 VW Eos Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2006 VW GTI Front Premium Posi Semi-Metallic Brake Pads L4 2.0L Turbo Nakamoto
  • 2007-2014 VW GTI Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2010-2014 VW Golf Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2005-2006 VW Jetta Front Premium Posi Semi-Metallic Brake Pads L5 2.5L Nakamoto
  • 2006 VW Jetta Front Premium Posi Semi-Metallic Brake Pads L4 2.0L Turbo Nakamoto
  • 2006 VW Jetta TDI Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2007-2018 VW Jetta Brake Pads Front Semi-Metallic Premium Posi Nakamoto
  • 2006-2010 VW Passat Front Premium Posi Semi-Metallic Brake Pads L4 2.0L Turbo Nakamoto
  • 2006-2009 VW Rabbit Front Premium Posi Semi-Metallic Brake Pads Nakamoto

This part replaces:

  • Nakamoto MD1107
  • Reference Number MD1107
Part #: 1ABPS00586

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD1107

How-to Video:

(16:51 min)