Specifications:

  • Premium Posi Semi Metallic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:10)
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Inspect and remove the brakes (1:46)
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 14 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and remove the caliper.
    • Unbolt the 15 mm caliper bracket bolts.
    • Remove the rotor
  3. step : Install the new disc brakes (4:33)
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle.
    • Mount the caliper bracket and torque the 15 mm bolts to 85-90 ft lbs
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 14 mm socket.
    • Torque the 14 mm bolt to 35 ft lbs.
  4. step : Mount the wheel (8:17)
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket

3.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
0
1
0
0
Brake pads
I purchased these brake pads because if the price and I knew how fast I would get them due to the fact that 1aauto is super fast when it comes to shipping. However I was a little dissatisfied in the performance of these pads. They are the semi-metallic pads and are a bit noisy and make a slight grinding noise when braking hard. They also squeal when they get hot. Would spend a little more to get ceramic pads.
March 16, 2017
Purchased
1 year ago
Response from 1A Auto
Hello Wesley. I am very sorry to hear you are not satisfied with the brake pad set you purchased from us. Please give us a call at 888-844-3393 and we can see about taking them back for a refund!
March 16, 2017
Tim KStaff
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:17 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket



This part replaces:

  • Nakamoto MD1033, MD1160

Vehicle Fit

  • 2008-2010 Chevy HHR SS Front & Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2007-2012 Chevy Malibu Front & Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2007 Chevy Malibu Maxx Front & Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2008 Pontiac G5 Premium Posi Semi-Metallic Brake Pads GT L4 2.4L Front & Rear Nakamoto
  • 2007-2008 Pontiac G6 Front & Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2009-2010 Pontiac G6 Front & Rear Semi-Metallic Premium Posi Brake Pads for Models with RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Nakamoto
  • 2007-2009 Saturn Aura Front & Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
Part #: 1ABFS02694

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD1033, MD1160

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More