Specifications:

  • Premium Posi Ceramic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:09)
    • Use a flat blade screwdriver to pry off the center cap
    • Loosen the lug nuts
    • Lift the vehicle and remove the lug nuts
    • Remove the wheel
  2. step : Removing the Brake Pads (2:12)
    • Using a flat blade screwdriver pry the pistons back into the caliper. Do this on both sides
    • Push down on the clip tab and remove the clip
    • Push the pins out
    • Twist and pull the pins out with pliers
    • Pull the wire clip out at the top of the caliper
    • Pull the pads out
  3. step : Removing the Brake Caliper and Rotors (4:37)
    • Pull the clip above the brakes up
    • Loosen the bolts on the back of the caliper (Use breaker bar or pipe for leverage)
    • Hold the caliper and remove the bolts
    • Pull the caliper up and set it aside
    • Pull the rotor off
  4. step : Replacing the Brakes (6:59)
    • Slide the rotor into place
    • Put the caliper back into place
    • Insert the bolts on the back of the caliper. Torque to 100ft/lbs
    • Replace the clip at the top of the brake
    • Put the pads back into place
    • Put the wire clip back at the top of the brake pads
    • Put the upper pin back in to place
    • Put the lower pin back into place
    • Put the wire clip back into place on the side of the brakes
  5. step : Replacing the Wheel (10:51)
    • Put the wheel back into place
    • Replace the lug nuts
    • Lower the vehicle
    • Torque the lug nuts to 120ft/lbs
    • Replace the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
are these the 4.7 inch?
david s on Feb 17, 2017
BEST ANSWER: I don't have the exact measurements. Our parts are designed to be exact replacements for what came with the vehicle, so as long as your year, make, and model match up with our listing, these will definitely fit and function just like the original. Please let us know if you have any other questions.

Vehicle Fit

  • 2010-2017 Lexus GX460 Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2003-2009 Lexus GX470 Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2003-2017 Toyota 4Runner Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2007-2014 Toyota FJ Cruiser Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2001-2003 Toyota Sequoia Front Premium Posi Ceramic Brake Pads for Models with 5.3 Inch Front Pad Length Nakamoto
  • 2004-2007 Toyota Sequoia Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2005-2017 Toyota Tacoma 4 Wheel Drive Front Brake Pads Ceramic Premium Posi Nakamoto
  • 2005-2017 Toyota Tacoma 2 Wheel Drive Front Premium Posi Ceramic Brake Pads for Models with 6 Lug Wheels Nakamoto
  • 2000-2003 Toyota Tundra Front Premium Posi Ceramic Brake Pads for Models with 5.3 Inch Front Pad Length Nakamoto
  • 2004-2006 Toyota Tundra Front Premium Posi Ceramic Brake Pads Nakamoto

This part replaces:

  • Nakamoto CD976
Part #: 1ABPS00324

Nakamoto
Brand #: CD976

How-to Video:

(11:57 min)