Specifications:

  • Professional Grade Ceramic Disc Brake Pads
  • 4 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacements

 

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:06)
    • Loosen the lug nuts with your lug wrench or 13/16 inch socket and ratchet
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel
  2. step : Remove the brakes (2:00)
    • Unbolt the two 10 mm caliper bolts
    • Use a flat blade screwdriver to compress the caliper pistons to get the caliper off the rotor
    • Pry out the brake pads with your flat blade screwdriver.
    • Remove the rubber plug behind the hub to loosen the emergency break with a screwdriver.
    • There is a star shaped gear that you turn with the flat blade screwdriver to loosen it.
    • Use a pry bar to apply outward pressure to the rotor and a hammer to break the rotor loose.
    • Clean up the emergency break adjustor with a bit of penetrating oil.
  3. step : Install the new brakes (6:50)
    • Put the rotor back on, cleaning the rotor with brake cleaner before hand.
    • Tighten the emergency break with a flat blade screwdriver
    • Install new brake pads into the brake caliper.
    • Apply a small about of anti-seize grease to the edges of the pads to get them into the caliper
    • Work the caliper back onto the rotor.
    • Bolt the two 10 mm bolts on the caliper and torque to 20 ft lbs.
  4. step : Put the wheel back on (10:12)
    • Put the wheel on and hand tighten the lug nuts
    • Lower the car and torque the lug nuts to 100 ft lbs
    • Pump the brakes a few times to recompress the caliper pistons.
    • Do a couple 5 to 10 mile an hour stops in the drive way to make sure your brakes are working properly before you road test it.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(11:10 min)

Tools List:

    General Tools

  • Jack Stands
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • Reference Number CD931
  • Reference Number CD932
  • Nakamoto CD931, CD932

Vehicle Fit

  • 2003-2011 Ford Crown Victoria Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2003-2011 Lincoln Town Car Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2003-2011 Mercury Grand Marquis Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2003-2004 Mercury Marauder Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
Part #: 1ABFS02238

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD931, CD932

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More