Specifications:

  • Premium Posi Ceramic Brake Pad Kit
  • 8 Piece Front & Rear brake pad set
  • Direct replacement
  • Includes shims

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:24)
    • Remove the center cap with a screwdriver
    • Take the plastic lug covers off.
    • With a 19 mm socket and ratchet or lug wrench, loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts.
    • Remove the wheel and set aside.
  2. step : Remove the brakes (1:39)
    • Use a 13 mm socket to remove the calipers.
    • Pry up the brake pads with your flat blade screwdriver.
    • Check the life of your rotors by checking for grooves and wear.
    • Use your 18 mm socket and ratchet to remove the caliper brackets.
    • Remove the rotors if needed.
  3. step : Install the new brakes (4:32)
    • Clean your rotors with brake parts cleaner and put them on the hub.
    • Apply anti-seize grease to the edges of the brake pads where they slide into the calipers.
    • Compress your caliper pistons with a large C-Clamp
    • Clean up your caliper bolts and apply a little anti-seize grease to them.
    • Put your caliper brackets back on.
    • Put the brake pads into the caliper brackets and then the caliper.
    • Put the caliper bolts into your brackets, with the one with the bushing on the bottom.
    • Torque the caliper bracket bolts to 90 ft lbs, and the caliper bolts to 25.
  4. step : Put the wheel back on. (8:53)
    • Put the wheel back on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100-120 ft lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Wire Brush
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 13mm Wrench
  • 19mm Wrench
  • 18mm Wrench

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Brake Pads
I’m very pleased with quality and performance of these ceramic pads. I should have read the description closer to realize neither front or rear pads included brake hardware. I reused the old and everything works fine.
February 13, 2018
Purchased
6 months ago
Brakes
Was a little concerned about buying these brake pads.But have had them on for only a week and no problems yet, pads look good out of the box. Don't for see any problem or concerns with their performance.Lets see how long they last,would recommend them.A lot less expensive than a box store.
September 23, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2005 Buick Rainier Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2004-2005 Chevy SSR Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2002-2005 Chevy Trailblazer Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2002-2005 Chevy Trailblazer EXT Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2002-2005 GMC Envoy Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2002-2005 GMC Envoy XL Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2004-2005 GMC Envoy XUV Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2003-2006 Isuzu Ascender Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2002-2004 Olds Bravada Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2005 Saab 9-7X Front & Rear Premium Posi Ceramic Brake Pads Nakamoto

This part replaces:

  • Nakamoto CD882, CD883
Part #: 1ABFS02264


Order must be placed by 4pm ET
Nakamoto
Brand #: CD882, CD883

How-to Video:

(09:57 min)