This front brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • 297mm 4 Piece FRONT Brake Pad Set
  • Direct replacement
  • Professional Grade Ceramic Enhanced Disc Brake Pads

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:13)
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Inspect and remove the brakes (1:46)
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 10 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and pry off the caliper.
    • Remove the rotor.
  3. step : Install the new disc brakes (4:01)
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle.
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 10 mm socket.
    • Torque the 10 mm bolts to 25 ft lbs.
  4. step : Mount the wheel (7:44)
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2004 Chrysler 300M Front Premium Posi Ceramic Brake Pads for Models with 11.69" (297mm) Diameter Front Rotors Performance Brakes Nakamoto
  • 2001-2005 Chrysler Sebring Sedan Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2001-2005 Chrysler Sebring Convertible Front Ceramic Premium Posi Brake Pads Nakamoto
  • 2006 Chrysler Sebring Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2001-2006 Dodge Stratus 4 Door Sedan Front Premium Posi Ceramic Brake Pads Nakamoto

This part replaces:

  • Nakamoto CD869
Part #: 1ABPS00637

Nakamoto
Brand #: CD869

How-to Video:

(08:52 min)