• Premium Posi Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (0:52)
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Inspect and remove the brakes (1:07)
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 14 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and remove the caliper.
    • Unbolt the 19 mm caliper bracket bolts.
    • Remove the rotor and pop the plug out of the rotor.
  3. step : Install the new disc brakes (2:07)
    • Hit the emergency brake with brake cleaner.
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle and replace the little access plug.
    • Mount the caliper bracket and torque the 19 mm bolts to 85-90 ft lbs
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 14 mm socket.
    • Torque the 14 mm bolt to 25 ft lbs.
  4. step : Mount the wheel (4:39)
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 19mm Socket
  • 21mm Socket
  • 8mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Recent purchase
This order as ones past came in very timely matter. The part I ordered was the cheapest compared to the competitors. I have received my parts sooner than than other orders I have had to pay for shipping. The only problem is that some parts I have need were not carried and I had to purchase elsewhere
April 7, 2018
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Is it really 8 brakes comes in the package..?? I have a 2011 nissan sentra 2.0 does these brakes fit for my car..
Nitaa on Aug 18, 2017
BEST ANSWER: Yes, in this set you will receive 8 brake pads to cover all four wheels. These are direct fit replacements for your 2011 Nissan Sentra 2.0.

Vehicle Fit

  • 2003-2004 Infiniti G35 Front & Rear Premium Posi Brake Pads Ceramic without Brembo Calipers Nakamoto
  • 2003-2005 Nissan 350Z Front & Rear Premium Posi Brake Pads Ceramic without Brembo Calipers Nakamoto
  • 2002-2004 Nissan Altima Front & Rear Premium Posi Brake Pads Ceramic Nakamoto
  • 2005-2006 Nissan Altima (excluding SE-R) Front & Rear Premium Posi Brake Pads Ceramic Nakamoto
  • 2007-2012 Nissan Altima 4 Door Front & Rear Premium Posi Brake Pads Ceramic Nakamoto
  • 2011-2016 Nissan Juke Premium Posi Brake Pads Ceramic Nakamoto
  • 2007-2016 Nissan Sentra Front & Rear Premium Posi Brake Pads Ceramic L4 2.0L Nakamoto
  • 2007-2017 Nissan Sentra (excluding Spec V) Front & Rear Premium Posi Brake Pads Ceramic Nakamoto

This part replaces:

  • Nakamoto CD815, CD905
Part #: 1ABFS02333

Ships Same Day for orders placed by 4 P.M. ET

Brand #: CD815, CD905

How-to Video:

(05:32 min)