Specifications:

  • Premium Posi Ceramic Brake Pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Remove center cap
    • While your car is still on the ground, use your 21mm socket to loosen your lug nuts
    • Jack up and secure your car with jack stands
    • Remove the lug nuts with your 21mm socket and ratchet
    • Remove the wheel and set aside
  2. step : Removing the Calipers (1:30)
    • Remove the 14mm bolts to remove the calipers
    • Use a wire tie to fasten the caliper out of the way
    • Use your 17mm socket and ratchet to remove your caliper brackets
    • Pop out your brake pads
  3. step : Install New Pads (4:07)
    • Check your caliper pins to make sure they are in good working order
    • Put your caliper bracket back on, and tighten the 17mm bolts to 70 ft lbs
    • Insert your new pads into the brackets
    • Use your C-clamp or caliper tool to compress your caliper
    • Place your caliper onto the bracket
    • Tighten your 14mm bolts
  4. step : Replacing the Wheel (7:25)
    • Make sure to use a star pattern when putting your wheel lugs back on
    • Tighten to 75-85 ft lbs
    • Replace center cap
  5. step : Testing the Brakes (8:20)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place
    • Test the brakes in your driveway before taking the car onto the road

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Can't beat the price and free delivery made the deal even sweeter.
March 21, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997 Acura CL Front & Rear Premium Posi Ceramic Brake Pads L4 2.2L Nakamoto
  • 1998-1999 Acura CL Front & Rear Premium Posi Ceramic Brake Pads L4 2.3L Nakamoto
  • 1990-1993 Honda Accord Sedan Front & Rear Premium Posi Ceramic Brake Pads for Models with Akebono Calipers Nakamoto
  • 1993-1994 Honda Accord Coupe Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 1994 Honda Accord Sedan Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 1995-1997 Honda Accord Front & Rear Premium Posi Ceramic Brake Pads L4 2.2L Nakamoto
  • 1998-2002 Honda Accord Front & Rear Premium Posi Ceramic Brake Pads L4 2.3L Nakamoto
  • 2002-2003 Honda Civic SI Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
  • 2006-2011 Honda Civic EX Front & Rear Premium Posi Ceramic Brake Pads Nakamoto

This part replaces:

  • FMSI CD537
  • FMSI CD465
  • FMSI CD465A
  • Nakamoto CD537, CD465A
Part #: 1ABFS02153

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD537, CD465A

How-to Video:

(09:04 min)