Specifications:

  • Premium Posi Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT Brake Pad Set
  • Includes shims
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:48)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (1:52)
    • Remove the two Phillips screws from the rotor
    • Unbolt the two 12mm caliper bolts from the caliper bracket
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Remove the brake pads
    • Unbolt the 17mm bolts from the caliper bracket
    • Remove the caliper bracket
    • Remove the rotor
  3. step : Installing the New Brake Pads and Rotor (4:30)
    • Clean the rotor with brake parts cleaner
    • Mount your new rotor onto the hub
    • Apply a dab of anti-seize grease to the Phillips screws
    • Tighten the Phillips screws to the rotor
    • Clean the brake pad slides with a wire brush
    • Mount the caliper bracket onto the rotor
    • Apply grease to the brake pad tabs
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Apply grease to the caliper bolts
    • Thread bolts by hand
    • Torque the caliper bracket bolts and the caliper bolts to 74 foot-pounds
  4. step : Reattaching the Wheel (8:20)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 19mm Socket

3.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
1
0
1
0
Great fit
Fit great, definitely do the job. Only be better if included hardware.
November 13, 2017
Purchased
5 months ago
Brake pads
The pads were relatively inexpensive and they came quickly however they only lasted 15,000 miles and had to be replaced. If you're looking for something that's durable these are not for you. I recommend going for something a little more expensive
February 9, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997 Acura CL Front Premium Posi Ceramic Brake Pads L4 2.2L Nakamoto
  • 1998-1999 Acura CL Front Premium Posi Ceramic Brake Pads L4 2.3L Nakamoto
  • 1990-1994 Honda Accord Sedan Front Premium Posi Ceramic Brake Pads for Models with Rear Drum Brakes Nakamoto
  • 1993-1997 Honda Accord Coupe Front Premium Posi Ceramic Brake Pads Nakamoto
  • 1995-1997 Honda Accord Sedan Front Premium Posi Ceramic Brake Pads L4 2.2L Nakamoto
  • 1998-2002 Honda Accord Sedan Front Premium Posi Ceramic Brake Pads L4 2.3L Nakamoto
  • 1998-2001 Honda Accord Coupe Front Premium Posi Ceramic Brake Pads L4 2.3L Nakamoto
  • 2002 Honda Accord Coupe Front Premium Posi Ceramic Brake Pads V6 3.0L Nakamoto
  • 1996-2000 Honda Civic SI Front Premium Posi Ceramic Brake Pads Nakamoto
  • 1996-2000 Honda Civic EX Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2001-2003 Honda Civic Front Premium Posi Ceramic Brake Pads (excluding Hybrid Models) Nakamoto
  • 2004-2005 Honda Civic Front Premium Posi Ceramic Brake Pads (excluding SI Models) Nakamoto
  • 2006-2011 Honda Civic EX Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2006-2011 Honda Civic Front Premium Posi Ceramic Brake Pads for Models with Rear Drum Brakes (excluding GX Models) LX Nakamoto
  • 2006-2011 Honda Civic DX Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2010-2014 Honda Insight Front Premium Posi Ceramic Brake Pads Nakamoto

This part replaces:

  • Nakamoto CD465A
Part #: 1ABPS00164

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD465A

How-to Video:

(10:07 min)