Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Ceramic
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

This front disc brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • Fits FRONT Rotors
  • 4 Piece Brake Pad Set
  • Includes shims
  • Ceramic Enhanced Disc Brake Pads

This front brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel and tire (1:13)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (1:40)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your socket to remove the brackets.
  3. step : Remove brake disk (3:00)
    • Take care not to touch the rotor, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (3:16)
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a pry bar to remove the axle.
    • Remove the 3 bolts securing the hub using your 18mm socket and extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Disconnect your ABS sensor.
    • Use a rubber mallet to break your hub free, and work around the flange with the hammer to pull it off.
    • Remove the hub and shield.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (9:26)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18 mm bolts in place and tighten the nuts to 100 ft lbs.
    • Reinstall the ABS harness.
    • Replace the axle.
    • Tighten but don't torque the lug nut.
  6. step : Put brakes and wheel back on (11:40)
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 120 ft lbs
    • Hub nut is 185 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to pump the brakes and seat your rotors.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Just As Advertised for 2008 Dodge Ram 1500
After watching the 1AAuto video I linked up and purchased the ceramic pads! Installation was without a hitch! Id recommend these ceramic pads to anyone! They are completely silent with better grip & smooth stopping results!! Great customer service as well!! Thanks 1AAuto!! C. Stone in Jackson Ca.
June 19, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007-2009Chrysler Aspen Chrysler Aspen Front Premium Posi Ceramic Brake Pads Nakamoto
2005-2010Dodge Dakota Dodge Dakota Front Premium Posi Ceramic Brake Pads Nakamoto
2007-2009Dodge Durango Dodge Durango Front Premium Posi Ceramic Brake Pads Nakamoto
2006-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck Regular Cab Front Premium Posi Ceramic Brake Pads (excluding SRT-10) Nakamoto
2006-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck Quad Cab Front Premium Posi Ceramic Brake Pads Nakamoto
2009-2010Dodge Ram 1500 Truck Dodge Ram 1500 Truck Front Premium Posi Ceramic Brake Pads Nakamoto
2006-2009Mitsubishi Raider Mitsubishi Raider Front Premium Posi Ceramic Brake Pads Nakamoto
2011Ram 1500 Truck Ram 1500 Truck Front Premium Posi Ceramic Brake Pads Nakamoto
2012Ram 1500 Truck Ram 1500 Truck Premium Posi Brake Pads Ceramic (excluding Tradesman HD) Front Nakamoto
2013-2018Ram 1500 Truck Ram 1500 Truck Premium Posi Brake Pads Ceramic Front Nakamoto
2011Ram Dakota Ram Dakota Front Premium Posi Ceramic Brake Pads Nakamoto
Part #: 1ABPS00269


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD1084

How-to Video:

(13:39 min)