Specifications:

  • 8 Piece Front & Rear Brake Pad Set
  • Includes shims
  • Direct replacements
  • Professional Grade Ceramic Enhanced Disc Brake Pads

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel and tire (1:13)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (1:40)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your socket to remove the brackets.
  3. step : Remove brake disk (3:00)
    • Take care not to touch the rotor, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (3:16)
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a pry bar to remove the axle.
    • Remove the 3 bolts securing the hub using your 18mm socket and extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Disconnect your ABS sensor.
    • Use a rubber mallet to break your hub free, and work around the flange with the hammer to pull it off.
    • Remove the hub and shield.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (9:26)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18 mm bolts in place and tighten the nuts to 100 ft lbs.
    • Reinstall the ABS harness.
    • Replace the axle.
    • Tighten but don't torque the lug nut.
  6. step : Put brakes and wheel back on (11:40)
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 120 ft lbs
    • Hub nut is 185 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to pump the brakes and seat your rotors.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Overall, great product
These were a great match to my existing brake pads. I had to file one of the rear pads a little to make it fit in the slot, it was too tight otherwise. I would definitely buy them again.
February 22, 2018
Purchased
6 months ago
Nice quality
Good quality, only down side does not come with clips. But no biggy..
November 12, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2007-2009Chrysler Aspen Chrysler Aspen Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
2007-2009Dodge Durango Dodge Durango Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
2006-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck Quad Cab Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
2006-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck Front & Rear Regular Cab (excluding SRT-10) Brake Pads Ceramic Premium Posi Nakamoto
2009-2010Dodge Ram 1500 Truck Dodge Ram 1500 Truck Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
2011Ram 1500 Truck Ram 1500 Truck Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
2012Ram 1500 Truck Ram 1500 Truck Front & Rear Premium Posi Brake Pads Ceramic (excluding Tradesman HD) Nakamoto
2013-2018Ram 1500 Truck Ram 1500 Truck Front & Rear Premium Posi Brake Pads Ceramic Nakamoto

This part replaces:

  • Nakamoto CD1084, CD898
Part #: 1ABFS02347


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD1084, CD898

How-to Video:

(13:39 min)