Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Ceramic
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

This brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • Premium Posi Ceramic Enhanced Disc Brake Pads
  • 8 Piece FRONT & REAR Brake Pad Set
  • Direct replacements

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:41)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:08)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
  3. step : Removing the Brake Pads and Rotor (1:33)
    • Remove the two 10mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pull the rotor off
    • Pry the brake pads off the caliper with a flat blade screwdriver
    • Clean the friction areas with a wire brush
    • Clean the slides with a wire brush
    • Pry off the brake pad slides with a flat blade screwdriver
    • Tap the slides on with a hammer
    • Apply white grease to the slides
  4. step : Installing the Brake Pads and Rotors (5:02)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Slide the rotor on
    • Adjust the emergency brake, if necessary, by turning the star wheel with a flat blade screwdriver
    • Install the new brake pads into the caliper
    • Put the caliper on
    • Thread the two 10mm bolts by hand
    • Tighten the 10mm bolts to 17 foot-pounds
  5. step : Reattaching the Wheel (7:11)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 120 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  6. step : Testing the Brakes (7:35)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Large C-Clamp
  • Chisel
  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • White Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 10mm Socket

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Brake pads
The front and rear premium brake pads were the quality that I expected. The brake pads were a perfect fit for my Ford F-150.
August 31, 2017
Exact match
The five stars are for fit which seemed to be an exact match. I only installed the rear pads for now but looking at the new front pads all the pieces that go with them such as the slider surfaces and spring clips are in the package. I looks like a great product at a reasonable price.
February 23, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004Ford F150 Truck Ford F150 Truck New Body Style Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
2005-2008Ford F150 Truck Ford F150 Truck Front & Rear Ceramic Premium Posi Brake Pads Nakamoto
2006-2008Lincoln Mark LT Lincoln Mark LT Front & Rear Ceramic Premium Posi Brake Pads Nakamoto
Part #: 1ABFS01680


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD1083, CD1012

How-to Video:

(08:07 min)