Specifications:

  • Premium Posi Ceramic Disc Brake Pad Kit
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Built to strict quality control standards
  • Direct replacements

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:52)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (2:02)
    • Remove the two 15mm bolts from the caliper bracket
    • Pull the caliper off with a flat blade screwdriver
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (3:05)
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Preparing the New Brake Pads and Rotors (6:47)
    • Pry off the brake pad shims with a flat blade screwdriver
    • Clean the brake pad shims with a wire brush
    • Clean the caliper bracket with a wire brush
    • Apply brake grease to the shim-mounting area of the caliper bracket
    • Place the shim onto the caliper bracket
    • Apply grease to the caliper shims
    • Pull out the caliper slides
    • Apply grease to the caliper slides
    • Push the caliper slide into the caliper
  5. step : Installing the Brake Rotor (8:45)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the rotor with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two 18mm bolts into the caliper bracket
    • Tighten the two 18mm bolts to 88 foot-pounds of torque
  6. step : Installing the Brake Pads (10:26)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two 15mm bolts into the caliper
    • Tighten the two 15mm bolts to 23 foot-pounds of torque
  7. step : Reattaching the Wheel (11:33)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Chisel
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 15mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(12:06 min)

Tools List:

    General Tools

  • Jack Stands
  • Chisel
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 15mm Socket



This part replaces:

  • FMSI CD1057
  • FMSI CD1058
  • Nakamoto CD1057, CD1058

Vehicle Fit

  • 2005-2017 Chrysler 300 Front & Rear Premium Posi Ceramic Brake Pads for Models with 13.6" (345mm) Diameter Rotors Nakamoto
  • 2009-2017 Dodge Challenger Front & Rear Premium Posi Ceramic Brake Pads for Models with 13.6" (345mm) Diameter Rotors Nakamoto
  • 2006-2017 Dodge Charger Front & Rear Premium Posi Ceramic Brake Pads for Models with 13.6" (345mm) Diameter Rotors Nakamoto
  • 2005-2008 Dodge Magnum Front & Rear Premium Posi Ceramic Brake Pads for Models with 13.6" (345mm) Diameter Rotors Nakamoto
Part #: 1ABFS02064

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD1057, CD1058

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More