Specifications:

  • Premium Posi Ceramic Disc Brake Pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacements

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:31)
    • Hold the wheel studs with a brake rotor
    • Remove the two 13mm bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (1:55)
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Preparing the New Brake Pads and Rotors (3:14)
    • Pry off the brake pad shims with a flat blade screwdriver
    • Clean the brake pad shims with a wire brush
    • Clean the caliper bracket with a wire brush
    • Apply brake grease to the shim-mounting area of the caliper bracket
    • Place the shim onto the caliper bracket
    • Apply grease to the caliper shims
    • Pull out the caliper slides
    • Apply grease to the caliper slides
    • Push the caliper slide into the caliper
  5. step : Installing the Brake Rotor (5:36)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two 18mm bolts into the caliper bracket
    • Tighten the two 18mm bolts to 70 foot-pounds of torque
  6. step : Installing the Brake Pads (7:05)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two 13mm bolts into the caliper
    • Tighten the two 13mm bolts to 44 foot-pounds of torque
  7. step : Reattaching the Wheel (8:08)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Anti-Seize Grease
  • Gloves
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Excellent stopping power! Unbeatable price.
Very nice break pads. smooth, strong stopping power. at an excellent price. thanks 1aauto your customers service is one of the best I've ever encountered
Bob

Grapeview wash
August 13, 2018
Purchased
3 weeks ago
Fast,fast, fast
Great brakes and they came in the mail super fast!! Will continue to make all my part purchases from 1A. Thank you guys!
June 25, 2018
Purchased
2 months ago
Great
Just what I needed for my car perfect fit easy installation.
June 14, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005-2017Chrysler 300 Chrysler 300 Front & Rear Premium Posi Ceramic Brake Pads for Models with 12.6" (320mm) Diameter Rotors Nakamoto
2009-2010Dodge Challenger Dodge Challenger Front & Rear Premium Posi Ceramic Brake Pads V6 3.5L Nakamoto
2011-2017Dodge Challenger Dodge Challenger Front & Rear Premium Posi Ceramic Brake Pads V6 3.6L Nakamoto
2006-2017Dodge Charger Dodge Charger Front & Rear Premium Posi Ceramic Brake Pads for Models with 12.6" (320mm) Diameter Rotors Nakamoto
2005-2008Dodge Magnum Dodge Magnum Front & Rear Premium Posi Ceramic Brake Pads for Models with 12.6" (320mm) Diameter Rotors Nakamoto

This part replaces:

  • Nakamoto CD1056, CD1057
Part #: 1ABFS02056


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD1056, CD1057

How-to Video:

(08:37 min)