Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Ceramic
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

Specifications:

  • Professional grade Ceramic Enhanced brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacements

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:10)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
  3. step : Removing the Brake Pads (1:27)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads into the caliper with a flat blade screwdriver
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (2:17)
    • Remove the two 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread one lug nuts and strike the rotor from behind with a hammer
  5. step : Preparing the New Brake Pads and Rotors (3:04)
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the rotor with brake parts cleaner
  6. step : Installing the New Brake Rotor (4:12)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Slide the rotor on
    • Thread one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the two 21mm bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
  7. step : Installing the New Brake Pads (5:16)
    • Install the new brake pads into the bracket with the wear indicator on the lower side
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten bolts to 25 foot-pounds
    • Remove the placeholder lug nut
  8. step : Reattaching the Wheel (6:09)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  9. step : Testing the Brakes (6:37)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large C-Clamp
  • Wire Brush
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Cloth Rags

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006Infiniti QX56 Infiniti QX56 Front & Rear Premium Posi Ceramic Brake Pads (Built After 10/05 Production Date) Nakamoto
2007-2010Infiniti QX56 Infiniti QX56 Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
2006Nissan Armada Nissan Armada Front & Rear Premium Posi Ceramic Brake Pads (Built After 10/05 Production Date) Nakamoto
2007-2011Nissan Armada Nissan Armada Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
2008-2010Nissan Titan Nissan Titan Front & Rear Premium Posi Ceramic Brake Pads Nakamoto
Part #: 1ABFS02946


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD1041, CD1286

How-to Video:

(07:06 min)