Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Friction Material:   Ceramic
  • Front or Rear Location:   Front

RAYBESTOS SERVICE GRADE FRONT BRAKE PAD SET: SGD843C

The Raybestos® brand is a name firmly rooted in a proud tradition of innovative product design and manufacturing excellence. The premier brand of replacement products since 1902, the Raybestos® brand name has changed the way people think about brake products and brake performance with continual innovations and dedication to quality.

Specifications:

  • Brand New Raybestos Front Brake Pad Set
  • Material: Ceramic
  • Shims, slots and chamfers like OE
  • Engineered for safe, quiet braking
  • Replaces dealer part numbers: 4L8Z2001AA, 4L8Z 2001 AA, 6L8Z2001BA, 6L8Z 2001 BA, YL8Z2001BA, YL8Z 2001 BA, EC253323ZA, EC25 3323 ZA, EC253323ZB, EC25 3323 ZB, EC253323ZD, EC25 3323 ZD

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:54)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:14)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brake Pads (1:57)
    • Pull the dust covers off the brake caliper bolts
    • Remove the two T47 Torx bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pull the inner brake pad out of the brake caliper
    • Pull the outer brake pad off the caliper bracket
  4. step : Removing the Brake Rotor (3:47)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (4:28)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the two 18mm bolts by hand
    • Tighten the 18mm bolts to 90 foot-pounds of torque
  6. step : Installing the New Brake Pads (5:19)
    • Pry off the brake caliper clip with a flat blade screwdriver
    • Put an old pad or a block of wood in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new inner brake pad into the caliper
    • Put the new outer brake pad in the caliper bracket
    • Put the caliper on
    • Push on the caliper clip
    • Thread the two T47 Torx bolts
    • Tighten the T47 bolts to 20 foot-pounds
    • Put the dust covers onto the caliper bolts
  7. step : Reattaching the Wheel (7:22)
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (7:46)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Block of Wood

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 18mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2004Ford Escape Ford Escape Front Brake Pads Ceramic Raybestos SGD843C
2005-2007Ford Escape Ford Escape Front Brake Pads Ceramic Front Wheel Drive Raybestos SGD843C
2001-2004Mazda Tribute Mazda Tribute Front Brake Pads Ceramic Raybestos SGD843C
2005-2006Mazda Tribute Mazda Tribute Front Brake Pads Ceramic L4 2.3L Raybestos SGD843C
2005-2007Mercury Mariner Mercury Mariner Front Brake Pads Ceramic L4 2.3L Raybestos SGD843C
Only 2 left in stock
Part #: RABPS00014


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Raybestos
Brand #: SGD843C

How-to Video:

(08:23 min)