Specifications:

  • 4 Piece FRONT Brake Pad Set
  • Direct replacement
  • SEMI-METALLIC Disc Brake Pads

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Part Details

  • Front or Rear Location: Front
  • Brake Pad Friction Material: Semi-Metallic
  • Brake Pad Bonding Type: Premium Posi

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove front wheel. (1:06)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your lug wrench to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your lug wrench.
    • Remove the wheel and set aside.
  2. step : Remove the front brake calipers (1:30)
    • Use a screwdriver to force the pistons back in.
    • Remove the three 3/8 Allen bolts to remove the calipers.
    • Clean out the Allen bolts if needed.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Install new brake rotor and pads (3:45)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the front brake caliper.
    • Compress the front brake caliper piston with a c-clamp to reset the pistons.
    • Mount the front brake caliper and torque the 3/8 Allen bolts in as tight as they will go by hand.
  4. step : Put your front wheel back on (8:14)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 75 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brake pads and rotors (6:30)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1990 Buick Skylark Front Premium Posi Semi-Metallic Brake Pads for Models with RPO Code WS6 Performance Package Nakamoto
  • 1991-1995 Buick Skylark Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1992-1996 Chevy Beretta Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1992-2004 Chevy Cavalier Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1992-1996 Chevy Corsica Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1992-1998 Olds Achieva Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1990 Olds Calais Front Premium Posi Semi-Metallic Brake Pads for Models with RPO Code WS6 Performance Package Nakamoto
  • 1991 Olds Calais Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1990 Olds Cutlass Calais Front Premium Posi Semi-Metallic Brake Pads for Models with RPO Code WS6 Performance Package Nakamoto
  • 1991 Olds Cutlass Calais Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1990 Pontiac Grand Am Front Premium Posi Semi-Metallic Brake Pads for Models with RPO Code WS6 Performance Package Nakamoto
  • 1991-1997 Pontiac Grand Am Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1992-1994 Pontiac Sunbird Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1995-2005 Pontiac Sunfire Front Premium Posi Semi-Metallic Brake Pads Nakamoto

This part replaces:

  • Nakamoto MD506
Part #: 1ABPS00012

Nakamoto
Brand #: MD506

How-to Video:

(09:09 min)